JVC SR-V10E specifications Power

Page 59

TROUBLESHOOTING

EN 59

Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your video recorder off for repair.

POWER

 

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

1.

No power is supplied to the recorder.

The mains power cord is disconnected.

Connect the mains power cord.

 

 

 

 

2.

The clock is functioning properly, but

“#” is displayed on the front display

Press the # button to turn the “#”

 

the recorder cannot be powered.

panel with “AUTO TIMER” set to “OFF”.

indicator off.

 

 

 

 

3.

The remote control won’t function.

The batteries are discharged.

Replace the dead batteries with new ones.

 

 

 

 

TAPE TRANSPORT

 

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

1.

During recording, the tape does not

The recorder is in the Record Pause

Press 4 to resume recording.

 

run. “” lights up and the channel

mode.

 

 

display blinks on the front display

 

 

 

panel.

 

 

 

 

 

 

2.

The tape will not rewind or

The tape is already fully rewound or

Check the cassette.

 

fast-forward.

fast-forwarded.

 

 

 

 

 

PLAYBACK

 

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

1.

The playback picture does not appear

If you are using the RF connection,

If you are using the RF connection,

 

while the tape is running.

. . . the TV receiver’s channel selector is

. . . set the TV receiver to the video

 

 

not set to the video channel.

channel.

 

 

. . . the recorder’s video channel has not

. . . perform “Video Channel Set”

 

 

been correctly set.

( pg. 58).

 

 

If you are using the AV or S-VIDEO

If you are using the AV or S-VIDEO

 

 

connection, the TV receiver is not set to

connection, set the TV to its AV mode.

 

 

the AV mode.

 

 

 

 

 

2.

Noise appears during visual search.

This is normal.

 

 

 

 

 

3.

Noise appears during normal

The automatic tracking mode is

Try manual tracking. ( pg. 18)

 

playback.

engaged.

 

 

 

 

 

4.

The playback picture is blurred or

The video heads may be dirty.

Use a dry cleaning cassette TCL-2 or

 

interrupted while TV broadcasts are

 

consult your JVC dealer.

 

clear or “USE CLEANING CASSETTE”

 

 

 

message appears on the screen.

 

 

 

 

 

 

5.

Breaks are noticeable in Hi-Fi

The automatic tracking mode is

Try manual tracking. ( pg. 18)

 

soundtrack.

engaged.

 

 

 

 

 

Image 59
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Connector coverRear View Close the battery cover until it clicks in placeFront Display Panel ON-SCREEN Display Remote Control Operating JVC TVs How To UseConnect the recorder to TV Check the contents10 EN Situate the recorderVideo Connection 8To connect to a TV with S-VIDEO/AUDIO in connectorsSelect your country Auto Set Up12 EN Turn on the recorderWith AV or S-VIDEO connection Perform Auto Set UpConfirm/Set video channel With RF connectionLast-Function Memory Results of Auto Set Up appear on the front display panel14 EN Just ClockBasic Playback Pause during playback 16 ENSlow Motion High-Speed Turbo SearchSkip Search Mode Lock To prohibit any operations during playbackVariable Speed Search Index SearchManual Tracking 18 ENNext Function Memory Repeat PlaybackStart recording Recording Resume FunctionChoose a programme Set the tape speedAccidental erasure prevention Mode Lock To prohibit any operations during recording20 EN Watching AnotherRepeat Recording Tape Remaining TimeReceiving Stereo and Bilingual Programmes Engage the S-VHS ET mode22 EN Super VHS ET S-VHS ETRecording PlaybackSR-V10E-2 Series Playback24 EN SR-V10E-1Load cassettes Start playback Make connectionsTurn on all components 26 EN Series RecordingPress 0on the SR-V10E which is recording Set the input mode on both SR-V10EPrepare for recording Start recording Press 7on either of SR-V10E28 EN Access the Showview screenAccess the Showview Program screen Before performing the Showview Timer ProgrammingEnter the programme title Set the VPS/PDC modeAccess the Title Edit screen Engage the recorder’s timer mode30 EN Express Timer ProgrammingPress PR+ To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the channel positionSet the programme start/stop time and channel Enter the programme modeBefore performing the 24 Hour Express Timer Programming 32 ENAccess the Programme Check screen/display Cancel or change a programmeDisengage the timer mode Return to the timer modeOverlapping programmes blink on the TV screen Cancel or change programme settingConfirm the overlapping programmes Select the programme to modifyBefore performing the following steps Recording modeProgramme Recording 36 EN NavigationLoad a recorded cassette Access the Main Menu screenNavigation Playback Programme Navigation ScreenSelect the programme 38 ENEdit Programme Title Example Enter JVC News Entering CharacterDelete Tape Data Delete the tape data40 EN Edit From a CamcorderStart the source player Set the input mode of recording deckAnother Video Recorder Advantages of S-VHS video recordersConnecting To a Satellite Receiver Make connections Connecting/Using a Stereo SystemSelect the mode setting Mode SetAccess the Mode Set screen Select the modeWe recommend that you set Digital TBC/NR to on when Using this video recorder as the source player for editingPowered back on Picture reproduction is also linked to this functionSet PROG. Navigation to OFF While timer-recording in SP mode46 EN ScreenPanel. Then, set S-VHS to OFF. The S-VHS indicator goes off Correction to the luminance signal to enhance detailS-VHS recording mode is selected SettingAbout Ntsc Playback 48 ENGuide Program Number Showview System SetupAccess the Initial Set screen Guide Program Number SetAuto Channel Set Access the Auto Channel Set screenTuner Set 50 ENPress OK Perform Auto Channel SetView the Confirmation screen Manual Channel Set 52 ENDelete a channel Delete a ChannelChange Station Channel Position Select the itemSet Stations B 54 ENSet Stations a Station Name TV Station And ID List56 EN Access the Clock Set screenClock Set Start the clock operation Set the date and timeSet Just Clock Set the source channel position for clock data58 EN Video Channel SetPower Recording 60 ENOther Problems Playback 62 ENLines S-VHS Signal-to-noise ratio 45 dB Horizontal resolutionScan system Lines VHS64 EN Memo 66 EN