JVC SR-V10E specifications Perform Auto Set Up, Confirm/Set video channel, With RF connection

Page 13

EN 13

C Perform Auto Set Up.

Press OK.

“Auto” blinks on the front display panel; do NOT press any button on the recorder or remote control until the front display panel shows either the display as illustrated in step 4 or “– –:– –” as illustrated on page 14.

●If you are using the on-screen

display, the AUTO SET screen will appear. As Auto Set Up progresses, the “q” mark on the TV screen moves from left to right.

BeginningEnd

D Confirm/Set video channel.

With RF connection

The video channel that is shown on the display panel is your video channel. Press OK.

●If you have selected

MAGYARORSZÁG, CESKÁ REPUBLIKA, POLSKA or OTHER EASTERN EUROPE in step 2 on page 12, “2” appears instead of “1”.

●To view picture signals from the recorder, set your TV to the video channel.

With AV or S-VIDEO connection

Press PR – until the display panel shows “1 – –” (or

“2 – –”). Now the video channel is set to off. Then press OK.

●To view picture signals from the recorder, set your TV to its AV mode.

ATTENTION

Once you have performed Auto Set Up, even if the recorder’s memory backup has expired, all the stored stations and their Guide Program numbers remain in the recorder’s memory and the recorder will not perform Auto Set Up again. You only need to set the clock. ( pg. 56)

If you have moved to a different area, perform each setting as required.

●Video channel setting (for RF connection users) pg. 58

●Tuner setting pg. 50

●Clock setting pg. 56

If a new station starts broadcasting in your area, perform tuner setting ( pg. 50) and, if necessary, video channel setting ( pg. 58).

NOTES:

●In the area where no TV station transmits a PDC (Programme Delivery Control) signal, the recorder can perform neither Auto Clock Set nor Auto Guide Program Number Set.

●If there is a power cut, or if you press 1 or MENU while Auto Set Up is in progress, Auto Set Up will be interrupted; be sure to turn off the recorder power once and try again from step 1.

●Auto Clock Set may not function properly depending on the reception condition.

●If no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Set Up, the TV system setting for those channels may be incorrect.

Select the appropriate TV system for those channels ( pg. 53, “INFORMATION”).

Image 13

Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Connector coverRear View Close the battery cover until it clicks in placeFront Display Panel ON-SCREEN Display Remote Control Operating JVC TVs How To Use10 EN Check the contentsSituate the recorder Connect the recorder to TVVideo Connection 8To connect to a TV with S-VIDEO/AUDIO in connectors12 EN Auto Set UpTurn on the recorder Select your countryConfirm/Set video channel Perform Auto Set UpWith RF connection With AV or S-VIDEO connection14 EN Results of Auto Set Up appear on the front display panelJust Clock Last-Function MemoryBasic Playback Slow Motion 16 ENHigh-Speed Turbo Search Pause during playbackVariable Speed Search Mode Lock To prohibit any operations during playbackIndex Search Skip SearchNext Function Memory 18 ENRepeat Playback Manual TrackingChoose a programme Recording Resume FunctionSet the tape speed Start recording20 EN Mode Lock To prohibit any operations during recordingWatching Another Accidental erasure preventionRepeat Recording Tape Remaining Time22 EN Engage the S-VHS ET modeSuper VHS ET S-VHS ET Receiving Stereo and Bilingual ProgrammesRecording Playback24 EN Series PlaybackSR-V10E-1 SR-V10E-2Turn on all components Make connectionsLoad cassettes Start playback 26 EN Series RecordingPrepare for recording Start recording Set the input mode on both SR-V10EPress 7on either of SR-V10E Press 0on the SR-V10E which is recordingAccess the Showview Program screen Access the Showview screenBefore performing the Showview Timer Programming 28 ENAccess the Title Edit screen Set the VPS/PDC modeEngage the recorder’s timer mode Enter the programme title30 EN Express Timer ProgrammingVPS/PDC Recording To Timer-Record Weekly Or Daily SerialsEnter the channel position Press PR+Before performing the 24 Hour Express Timer Programming Enter the programme mode32 EN Set the programme start/stop time and channelDisengage the timer mode Cancel or change a programmeReturn to the timer mode Access the Programme Check screen/displayConfirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Overlapping programmes blink on the TV screenProgramme Recording Recording modeBefore performing the following steps 36 EN NavigationNavigation Playback Access the Main Menu screenProgramme Navigation Screen Load a recorded cassetteEdit Programme Title 38 ENSelect the programme Delete Tape Data Entering CharacterDelete the tape data Example Enter JVC News40 EN Edit From a CamcorderAnother Video Recorder Set the input mode of recording deckAdvantages of S-VHS video recorders Start the source playerConnecting To a Satellite Receiver Make connections Connecting/Using a Stereo SystemAccess the Mode Set screen Mode SetSelect the mode Select the mode settingPowered back on Using this video recorder as the source player for editingPicture reproduction is also linked to this function We recommend that you set Digital TBC/NR to on when46 EN While timer-recording in SP modeScreen Set PROG. Navigation to OFFS-VHS recording mode is selected Correction to the luminance signal to enhance detailSetting Panel. Then, set S-VHS to OFF. The S-VHS indicator goes offAbout Ntsc Playback 48 ENAccess the Initial Set screen Showview System SetupGuide Program Number Set Guide Program NumberTuner Set Access the Auto Channel Set screen50 EN Auto Channel SetView the Confirmation screen Perform Auto Channel SetPress OK Manual Channel Set 52 ENChange Station Channel Position Delete a ChannelSelect the item Delete a channelSet Stations a 54 ENSet Stations B Station Name TV Station And ID ListClock Set Access the Clock Set screen56 EN Set Just Clock Set the date and timeSet the source channel position for clock data Start the clock operation58 EN Video Channel SetPower Recording 60 ENOther Problems Playback 62 ENScan system Signal-to-noise ratio 45 dB Horizontal resolutionLines VHS Lines S-VHS64 EN Memo 66 EN