JVC SR-V10E specifications Safety Precautions

Page 2

2 EN

SAFETY FIRST

Safety Precautions

The rating plate and the safety caution are on the rear of the unit.

WARNING: DANGEROUS VOLTAGE INSIDE

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTION

8When you are not using the recorder for a long period of time, it is recommended that you disconnect the power cord from the mains outlet.

8Dangerous voltage inside. Refer internal servicing to qualified service personnel. To prevent electric shock or fire hazard, remove the power cord from the mains outlet prior to connecting or disconnecting any signal lead or aerial.

WARNING

There are two different types of SECAM colour systems: SECAM-L, used in FRANCE (also called SECAM-West), and SECAM-B, used in Eastern European countries (also called SECAM-East).

1.This recorder can also receive SECAM-B colour television signals for recording and playback.

2.Recordings made of SECAM-B television signals produce monochrome pictures if played back on a video recorder of SECAM-L standard, or do not produce normal colour pictures if played back on a PAL video recorder with SECAM-B system incorporated (even if the TV set is SECAM-compatible).

3.SECAM-L prerecorded cassettes or recordings made with a SECAM-L video recorder produce monochrome pictures when played back with this recorder.

4.This recorder cannot be used for the SECAM-L standard. Use a SECAM-L recorder to record SECAM-L signals.

IMPORTANT

8Please read the various precautions on pages 2 and 3 before installing or operating the recorder.

8It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable programme and in any literary, dramatic, musical, or artistic work embodied therein.

Caution on Replaceable lithium battery

The battery used in this device may present a fire or chemical burn hazard if mistreated. Do not recharge, disassemble, heat above 100°C or incinerate. Replace battery with Panasonic (Matsushita Electric), Sanyo, Sony or Maxell CR2025. Danger of explosion or Risk of fire if the battery is incorrectly replaced.

8Dispose of used battery promptly.

8Keep away from children.

8Do not disassemble and do not dispose of in fire.

●Cassettes marked “S-VHS” and “VHS” can be used with this video cassette recorder. However, S-VHS recordings are possible only with cassettes marked “S-VHS”.

By using the S-VHS ET function, it is possible to record and play back with S-VHS picture quality on VHS cassettes with this recorder.

●SHOWVIEW is a registered trademark of Gemstar Development Corporation. The SHOWVIEW system is manufactured under licence from Gemstar Development Corporation.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Connector cover Front ViewClose the battery cover until it clicks in place Rear ViewFront Display Panel ON-SCREEN Display Remote Control How To Use Operating JVC TVsSituate the recorder Check the contents10 EN Connect the recorder to TV8To connect to a TV with S-VIDEO/AUDIO in connectors Video ConnectionTurn on the recorder Auto Set Up12 EN Select your countryWith RF connection Perform Auto Set UpConfirm/Set video channel With AV or S-VIDEO connectionJust Clock Results of Auto Set Up appear on the front display panel14 EN Last-Function MemoryBasic Playback High-Speed Turbo Search 16 ENSlow Motion Pause during playbackIndex Search Mode Lock To prohibit any operations during playbackVariable Speed Search Skip SearchRepeat Playback 18 ENNext Function Memory Manual TrackingSet the tape speed Recording Resume FunctionChoose a programme Start recordingWatching Another Mode Lock To prohibit any operations during recording20 EN Accidental erasure preventionTape Remaining Time Repeat RecordingSuper VHS ET S-VHS ET Engage the S-VHS ET mode22 EN Receiving Stereo and Bilingual ProgrammesPlayback RecordingSR-V10E-1 Series Playback24 EN SR-V10E-2Load cassettes Start playback Make connectionsTurn on all components Series Recording 26 ENPress 7on either of SR-V10E Set the input mode on both SR-V10EPrepare for recording Start recording Press 0on the SR-V10E which is recordingBefore performing the Showview Timer Programming Access the Showview screenAccess the Showview Program screen 28 ENEngage the recorder’s timer mode Set the VPS/PDC modeAccess the Title Edit screen Enter the programme titleExpress Timer Programming 30 ENEnter the channel position To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Press PR+32 EN Enter the programme modeBefore performing the 24 Hour Express Timer Programming Set the programme start/stop time and channelReturn to the timer mode Cancel or change a programmeDisengage the timer mode Access the Programme Check screen/displaySelect the programme to modify Cancel or change programme settingConfirm the overlapping programmes Overlapping programmes blink on the TV screenBefore performing the following steps Recording modeProgramme Recording Navigation 36 ENProgramme Navigation Screen Access the Main Menu screenNavigation Playback Load a recorded cassetteSelect the programme 38 ENEdit Programme Title Delete the tape data Entering CharacterDelete Tape Data Example Enter JVC NewsEdit From a Camcorder 40 ENAdvantages of S-VHS video recorders Set the input mode of recording deckAnother Video Recorder Start the source playerConnecting To a Satellite Receiver Connecting/Using a Stereo System Make connectionsSelect the mode Mode SetAccess the Mode Set screen Select the mode settingPicture reproduction is also linked to this function Using this video recorder as the source player for editingPowered back on We recommend that you set Digital TBC/NR to on whenScreen While timer-recording in SP mode46 EN Set PROG. Navigation to OFFSetting Correction to the luminance signal to enhance detailS-VHS recording mode is selected Panel. Then, set S-VHS to OFF. The S-VHS indicator goes off48 EN About Ntsc PlaybackGuide Program Number Set Showview System SetupAccess the Initial Set screen Guide Program Number50 EN Access the Auto Channel Set screenTuner Set Auto Channel SetPress OK Perform Auto Channel SetView the Confirmation screen 52 EN Manual Channel SetSelect the item Delete a ChannelChange Station Channel Position Delete a channelSet Stations B 54 ENSet Stations a TV Station And ID List Station Name56 EN Access the Clock Set screenClock Set Set the source channel position for clock data Set the date and timeSet Just Clock Start the clock operationVideo Channel Set 58 ENPower 60 EN RecordingOther Problems 62 EN PlaybackLines VHS Signal-to-noise ratio 45 dB Horizontal resolutionScan system Lines S-VHS64 EN Memo 66 EN
Top Page Image Contents