JVC SR-V10E specifications Confirm the overlapping programmes, Select the programme to modify

Page 34

34 ENTIMER RECORDING (cont.)

When programmes overlap each other

If “PROGRAM OVERLAPPED” appears, you have another programme overlapping the programme you have just made. The Programme Check screen appears and conflicting programmes will start blinking.

Example: Programme 1 (you have just made) and

Programme 4 overlap each other.

A Confirm the overlapping programmes.

Overlapping programmes blink on the TV screen.

B Select the programme to modify.

Press rt, then press OK or e.

You can only select one of the overlapping programmes.

NOTE:

If you do not mind this overlap, press PROG to finish the timer programme setting. The programme with the lower programme number will be recorded and the other one will not be recorded correctly. If no changes are made for approximately 1 minute, the recorder will return to the normal screen.

C Cancel or change programme setting.

To cancel a programme, press & when the Programme screen you do not want is shown. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears.

To change a programme, press the appropriate button: START+/–,STOP+/–,DATE+/–,PR+/–,VPS/PDC (number key “7”), DAILY (number key “8”), WEEKLY (number key “9”) and/or SP/LP/EP (p) when the Programme screen on which you want to make changes is shown, then press OK. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears.

NOTE:

If the overlap is not yet solved, or another overlap occurs with the timer programme setting after making the last correction on a programme, the conflicting programmes will be shown on the Programme Check screen again. Repeat the above steps again until the overlap is solved.

Image 34
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Connector cover Front ViewClose the battery cover until it clicks in place Rear ViewFront Display Panel ON-SCREEN Display Remote Control How To Use Operating JVC TVsSituate the recorder Check the contents10 EN Connect the recorder to TV8To connect to a TV with S-VIDEO/AUDIO in connectors Video ConnectionTurn on the recorder Auto Set Up12 EN Select your countryWith RF connection Perform Auto Set UpConfirm/Set video channel With AV or S-VIDEO connectionJust Clock Results of Auto Set Up appear on the front display panel14 EN Last-Function MemoryBasic Playback High-Speed Turbo Search 16 ENSlow Motion Pause during playbackIndex Search Mode Lock To prohibit any operations during playbackVariable Speed Search Skip SearchRepeat Playback 18 ENNext Function Memory Manual TrackingSet the tape speed Recording Resume FunctionChoose a programme Start recordingWatching Another Mode Lock To prohibit any operations during recording20 EN Accidental erasure preventionTape Remaining Time Repeat RecordingSuper VHS ET S-VHS ET Engage the S-VHS ET mode22 EN Receiving Stereo and Bilingual ProgrammesPlayback RecordingSR-V10E-1 Series Playback24 EN SR-V10E-2Turn on all components Make connectionsLoad cassettes Start playback Series Recording 26 ENPress 7on either of SR-V10E Set the input mode on both SR-V10EPrepare for recording Start recording Press 0on the SR-V10E which is recordingBefore performing the Showview Timer Programming Access the Showview screenAccess the Showview Program screen 28 ENEngage the recorder’s timer mode Set the VPS/PDC modeAccess the Title Edit screen Enter the programme titleExpress Timer Programming 30 ENEnter the channel position To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Press PR+32 EN Enter the programme modeBefore performing the 24 Hour Express Timer Programming Set the programme start/stop time and channelReturn to the timer mode Cancel or change a programmeDisengage the timer mode Access the Programme Check screen/displaySelect the programme to modify Cancel or change programme settingConfirm the overlapping programmes Overlapping programmes blink on the TV screenProgramme Recording Recording modeBefore performing the following steps Navigation 36 ENProgramme Navigation Screen Access the Main Menu screenNavigation Playback Load a recorded cassetteEdit Programme Title 38 ENSelect the programme Delete the tape data Entering CharacterDelete Tape Data Example Enter JVC NewsEdit From a Camcorder 40 ENAdvantages of S-VHS video recorders Set the input mode of recording deckAnother Video Recorder Start the source playerConnecting To a Satellite Receiver Connecting/Using a Stereo System Make connectionsSelect the mode Mode SetAccess the Mode Set screen Select the mode settingPicture reproduction is also linked to this function Using this video recorder as the source player for editingPowered back on We recommend that you set Digital TBC/NR to on whenScreen While timer-recording in SP mode46 EN Set PROG. Navigation to OFFSetting Correction to the luminance signal to enhance detailS-VHS recording mode is selected Panel. Then, set S-VHS to OFF. The S-VHS indicator goes off48 EN About Ntsc PlaybackGuide Program Number Set Showview System SetupAccess the Initial Set screen Guide Program Number50 EN Access the Auto Channel Set screenTuner Set Auto Channel SetView the Confirmation screen Perform Auto Channel SetPress OK 52 EN Manual Channel SetSelect the item Delete a ChannelChange Station Channel Position Delete a channelSet Stations a 54 ENSet Stations B TV Station And ID List Station NameClock Set Access the Clock Set screen56 EN Set the source channel position for clock data Set the date and timeSet Just Clock Start the clock operationVideo Channel Set 58 ENPower 60 EN RecordingOther Problems 62 EN PlaybackLines VHS Signal-to-noise ratio 45 dB Horizontal resolutionScan system Lines S-VHS64 EN Memo 66 EN