JVC SR-V10E Navigation Playback, Programme Navigation Screen, Load a recorded cassette

Page 37

EN 37

Navigation Playback

This function is useful when you wish to quickly find out what programmes you have recorded on a tape with this recorder. This function allows you to select a programme to watch, and then automatically searches for the start of the programme.

A Load a recorded cassette.

Insert a cassette recorded on this recorder.

B Access the Main Menu screen.

Press MENU.

C Access the Programme Navigation screen.

Press rt to move the highlight bar (pointer) to

“PROGRAMME NAVIGATION”, then press OK or e.

●If “NO TAPE DATA DETECTED” appears on the TV

screen, you cannot use the Navigation Playback function.

D Select a programme.

Press rt to move the highlight bar (pointer) to the programme you want to watch.

E Start playback.

Press OK. “SEARCHING” appears on the TV screen. Playback begins automatically after the selected programme is located.

Programme Navigation Screen

A Recording date

B Recording start time*

C Station name*

*After entering the programme title ( pg. 38), programme title appears instead of the recording start time and station name.

D Currently selected programme

E Programme title*

*Before entering the programme title ( pg. 38), recording start time and station name appear instead of the programme title.

NOTES:

●If you do not want to use Programme Navigation function, set “PROG. NAVIGATION” to “OFF” ( pg. 46).

●You cannot edit programme title or delete tape data for the

cassette with the record safety tab removed and “REC SAFETY” is set to “ON” ( pg. 48).

●Programme Navigation is possible with the cassettes recorded with this recorder only.

●Before recording, make sure the recorder’s clock is set correctly.

●To record the programme information in this recorder’s memory, you must continue to record each programme for over the minimum recording time; 8 minutes for the SP mode, 15 minutes for the LP mode or 23 minutes for the EP mode.

●Programme Navigation may not work properly depending on the tape being used.

●The programme information is stored in this recorder’s memory. If the memory in this recorder should ever be damaged and the programme information lost, it is impossible to restore that information.

Image 37

Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Connector coverRear View Close the battery cover until it clicks in placeFront Display Panel ON-SCREEN Display Remote Control Operating JVC TVs How To Use10 EN Check the contentsSituate the recorder Connect the recorder to TVVideo Connection 8To connect to a TV with S-VIDEO/AUDIO in connectors12 EN Auto Set UpTurn on the recorder Select your countryConfirm/Set video channel Perform Auto Set UpWith RF connection With AV or S-VIDEO connection14 EN Results of Auto Set Up appear on the front display panelJust Clock Last-Function MemoryBasic Playback Slow Motion 16 ENHigh-Speed Turbo Search Pause during playbackVariable Speed Search Mode Lock To prohibit any operations during playbackIndex Search Skip SearchNext Function Memory 18 ENRepeat Playback Manual TrackingChoose a programme Recording Resume FunctionSet the tape speed Start recording20 EN Mode Lock To prohibit any operations during recordingWatching Another Accidental erasure preventionRepeat Recording Tape Remaining Time22 EN Engage the S-VHS ET modeSuper VHS ET S-VHS ET Receiving Stereo and Bilingual ProgrammesRecording Playback24 EN Series PlaybackSR-V10E-1 SR-V10E-2Turn on all components Make connectionsLoad cassettes Start playback 26 EN Series RecordingPrepare for recording Start recording Set the input mode on both SR-V10EPress 7on either of SR-V10E Press 0on the SR-V10E which is recordingAccess the Showview Program screen Access the Showview screenBefore performing the Showview Timer Programming 28 ENAccess the Title Edit screen Set the VPS/PDC modeEngage the recorder’s timer mode Enter the programme title30 EN Express Timer ProgrammingVPS/PDC Recording To Timer-Record Weekly Or Daily SerialsEnter the channel position Press PR+Before performing the 24 Hour Express Timer Programming Enter the programme mode32 EN Set the programme start/stop time and channelDisengage the timer mode Cancel or change a programmeReturn to the timer mode Access the Programme Check screen/displayConfirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Overlapping programmes blink on the TV screenProgramme Recording Recording modeBefore performing the following steps 36 EN NavigationNavigation Playback Access the Main Menu screenProgramme Navigation Screen Load a recorded cassetteEdit Programme Title 38 ENSelect the programme Delete Tape Data Entering CharacterDelete the tape data Example Enter JVC News40 EN Edit From a CamcorderAnother Video Recorder Set the input mode of recording deckAdvantages of S-VHS video recorders Start the source playerConnecting To a Satellite Receiver Make connections Connecting/Using a Stereo SystemAccess the Mode Set screen Mode SetSelect the mode Select the mode settingPowered back on Using this video recorder as the source player for editingPicture reproduction is also linked to this function We recommend that you set Digital TBC/NR to on when46 EN While timer-recording in SP modeScreen Set PROG. Navigation to OFFS-VHS recording mode is selected Correction to the luminance signal to enhance detailSetting Panel. Then, set S-VHS to OFF. The S-VHS indicator goes offAbout Ntsc Playback 48 ENAccess the Initial Set screen Showview System SetupGuide Program Number Set Guide Program NumberTuner Set Access the Auto Channel Set screen50 EN Auto Channel SetView the Confirmation screen Perform Auto Channel SetPress OK Manual Channel Set 52 ENChange Station Channel Position Delete a ChannelSelect the item Delete a channelSet Stations a 54 ENSet Stations B Station Name TV Station And ID ListClock Set Access the Clock Set screen56 EN Set Just Clock Set the date and timeSet the source channel position for clock data Start the clock operation58 EN Video Channel SetPower Recording 60 ENOther Problems Playback 62 ENScan system Signal-to-noise ratio 45 dB Horizontal resolutionLines VHS Lines S-VHS64 EN Memo 66 EN