JVC SR-V10E Scan system, Signal-to-noise ratio 45 dB Horizontal resolution, Lines VHS

Page 63

SPECIFICATIONS

EN 63

GENERAL

Power requirement : AC 220 V – 240 Vd, 50 Hz/60 Hz Power consumption

Power on

: 18 W

Power off

: 3.6 W

Temperature

 

Operating

: 5°C to 40°C

Storage

: –20°C to 60°C

Operating position

: Horizontal only

Dimensions (WxHxD)

 

: 400 mm x 94 mm x 270 mm

Weight

: 3.4 kg

Format

: S-VHS/VHS PAL standard

Maximum recording time

(SP)

: 240 min. with E-240 video cassette

(LP)

: 480 min. with E-240 video cassette

(EP)

: 720 min. with E-240 video cassette

VIDEO/AUDIO

Signal system

: PAL-type colour signal and CCIR

 

monochrome signal, 625 lines

 

50 fields

Recording system

: DA4 (Double Azimuth) head helical

 

scan system

Signal-to-noise ratio: 45 dB

Horizontal resolution

(SP/LP)

: 250 lines (VHS)

 

400 lines (S-VHS)

(EP)

: 220 lines (VHS)

 

350 lines (S-VHS)

Frequency range

: 70 Hz to 10,000 Hz (Normal audio)

 

20 Hz to 20,000 Hz (Hi-Fi audio)

Input/Output

: RCA connectors:

 

VIDEO IN x 2, VIDEO OUT x 1,

 

AUDIO IN x 2, AUDIO OUT x 1

 

S-Video connectors:

 

IN x 2, OUT x 1

TUNER/TIMER

TV channel storage capacity

 

: 99 positions (+AUX position)

Tuning system

: Frequency synthesized tuner

Channel coverage

: VHF 47 MHz – 89 MHz/

 

104 MHz – 300 MHz/

 

302 MHz – 470 MHz

 

UHF 470 MHz – 862 MHz

Aerial output

: UHF channels 22 – 69 (Adjustable)

Memory backup time

:Approx. 6 months

Estimated figure based on provided fresh battery; actual performance may differ.

ACCESSORIES

Provided accessories

:RF cable, S-video cable, Audio/video cable,

Infrared remote control unit, “R6” battery x 2,

Lithium battery CR2025, BNC/RCA adapter x 2

Specifications shown are for SP mode unless otherwise specified.

E.& O.E. Design and specifications subject to change without notice.

Image 63
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Connector coverRear View Close the battery cover until it clicks in placeFront Display Panel ON-SCREEN Display Remote Control Operating JVC TVs How To UseConnect the recorder to TV Check the contents10 EN Situate the recorderVideo Connection 8To connect to a TV with S-VIDEO/AUDIO in connectorsSelect your country Auto Set Up12 EN Turn on the recorderWith AV or S-VIDEO connection Perform Auto Set UpConfirm/Set video channel With RF connectionLast-Function Memory Results of Auto Set Up appear on the front display panel14 EN Just ClockBasic Playback Pause during playback 16 ENSlow Motion High-Speed Turbo SearchSkip Search Mode Lock To prohibit any operations during playbackVariable Speed Search Index SearchManual Tracking 18 ENNext Function Memory Repeat PlaybackStart recording Recording Resume FunctionChoose a programme Set the tape speedAccidental erasure prevention Mode Lock To prohibit any operations during recording20 EN Watching AnotherRepeat Recording Tape Remaining TimeReceiving Stereo and Bilingual Programmes Engage the S-VHS ET mode22 EN Super VHS ET S-VHS ETRecording PlaybackSR-V10E-2 Series Playback24 EN SR-V10E-1Make connections Turn on all componentsLoad cassettes Start playback 26 EN Series RecordingPress 0on the SR-V10E which is recording Set the input mode on both SR-V10EPrepare for recording Start recording Press 7on either of SR-V10E28 EN Access the Showview screenAccess the Showview Program screen Before performing the Showview Timer ProgrammingEnter the programme title Set the VPS/PDC modeAccess the Title Edit screen Engage the recorder’s timer mode30 EN Express Timer ProgrammingPress PR+ To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the channel positionSet the programme start/stop time and channel Enter the programme modeBefore performing the 24 Hour Express Timer Programming 32 ENAccess the Programme Check screen/display Cancel or change a programmeDisengage the timer mode Return to the timer modeOverlapping programmes blink on the TV screen Cancel or change programme settingConfirm the overlapping programmes Select the programme to modifyRecording mode Programme RecordingBefore performing the following steps 36 EN NavigationLoad a recorded cassette Access the Main Menu screenNavigation Playback Programme Navigation Screen38 EN Edit Programme TitleSelect the programme Example Enter JVC News Entering CharacterDelete Tape Data Delete the tape data40 EN Edit From a CamcorderStart the source player Set the input mode of recording deckAnother Video Recorder Advantages of S-VHS video recordersConnecting To a Satellite Receiver Make connections Connecting/Using a Stereo SystemSelect the mode setting Mode SetAccess the Mode Set screen Select the modeWe recommend that you set Digital TBC/NR to on when Using this video recorder as the source player for editingPowered back on Picture reproduction is also linked to this functionSet PROG. Navigation to OFF While timer-recording in SP mode46 EN ScreenPanel. Then, set S-VHS to OFF. The S-VHS indicator goes off Correction to the luminance signal to enhance detailS-VHS recording mode is selected SettingAbout Ntsc Playback 48 ENGuide Program Number Showview System SetupAccess the Initial Set screen Guide Program Number SetAuto Channel Set Access the Auto Channel Set screenTuner Set 50 ENPerform Auto Channel Set View the Confirmation screenPress OK Manual Channel Set 52 ENDelete a channel Delete a ChannelChange Station Channel Position Select the item54 EN Set Stations aSet Stations B Station Name TV Station And ID ListAccess the Clock Set screen Clock Set56 EN Start the clock operation Set the date and timeSet Just Clock Set the source channel position for clock data58 EN Video Channel SetPower Recording 60 ENOther Problems Playback 62 ENLines S-VHS Signal-to-noise ratio 45 dB Horizontal resolutionScan system Lines VHS64 EN Memo 66 EN