JVC SR-V10E specifications Basic Playback

Page 15

PLAYBACK

EN 15

Basic Playback

Turn on the TV and select the video channel (or AV mode).

Playback Resume Function

If there is a power outage during normal playback, Repeat Playback ( pg. 18) or Series Playback ( pg. 24), the playback will resume automatically when the power is restored to the recorder if the lithium battery is not exhausted.

A Load a cassette.

Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointed toward the recorder.

●Do not apply too much pressure when inserting.

●The recorder will come on automatically.

●If the record safety tab has been removed and “REC SAFETY” is set to “ON” ( pg. 48), playback begins automatically.

●If the record safety tab is intact, or if the record safety tab is removed and “REC SAFETY” is set to “OFF” ( pg. 48), the

recorder checks the tape information for Programme Navigation. For details, refer to “Navigation” ( pg. 36).

B Find the programme start point.

If the tape is advanced past the start point, press 3or turn the JOG dial to the left. To go forward, press 5or turn the JOG dial to the right.

C Start playback.

Press 4. “bESt” appears blinking in the recorder’s front display panel during automatic tracking. ( pg. 23)

D Stop playback.

Press 8on the remote control or 0on the recorder’s front panel. Then press 0to remove the cassette.

Usable cassettes

●Compact VHS camcorder recordings can be played on this video recorder. Simply place the recorded cassette into a VHS Cassette Adapter and it can be used just like any full-sized VHS cassette.

●This video recorder can record on regular VHS and Super

VHS cassettes. While only VHS signals can be recorded on regular VHS cassettes*, both VHS and Super VHS signals can be recorded and played back using Super VHS cassettes.

*By using the S-VHS ET function, it is possible to record and play back with S-VHS picture quality on VHS cassettes with this recorder.

Image 15

Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Connector coverRear View Close the battery cover until it clicks in placeFront Display Panel ON-SCREEN Display Remote Control Operating JVC TVs How To UseConnect the recorder to TV Check the contents10 EN Situate the recorderVideo Connection 8To connect to a TV with S-VIDEO/AUDIO in connectorsSelect your country Auto Set Up12 EN Turn on the recorderWith AV or S-VIDEO connection Perform Auto Set UpConfirm/Set video channel With RF connectionLast-Function Memory Results of Auto Set Up appear on the front display panel14 EN Just ClockBasic Playback Pause during playback 16 ENSlow Motion High-Speed Turbo SearchSkip Search Mode Lock To prohibit any operations during playbackVariable Speed Search Index SearchManual Tracking 18 ENNext Function Memory Repeat PlaybackStart recording Recording Resume FunctionChoose a programme Set the tape speedAccidental erasure prevention Mode Lock To prohibit any operations during recording20 EN Watching AnotherRepeat Recording Tape Remaining TimeReceiving Stereo and Bilingual Programmes Engage the S-VHS ET mode22 EN Super VHS ET S-VHS ETRecording PlaybackSR-V10E-2 Series Playback24 EN SR-V10E-1Make connections Turn on all componentsLoad cassettes Start playback 26 EN Series RecordingPress 0on the SR-V10E which is recording Set the input mode on both SR-V10EPrepare for recording Start recording Press 7on either of SR-V10E28 EN Access the Showview screenAccess the Showview Program screen Before performing the Showview Timer ProgrammingEnter the programme title Set the VPS/PDC modeAccess the Title Edit screen Engage the recorder’s timer mode30 EN Express Timer ProgrammingPress PR+ To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the channel positionSet the programme start/stop time and channel Enter the programme modeBefore performing the 24 Hour Express Timer Programming 32 ENAccess the Programme Check screen/display Cancel or change a programmeDisengage the timer mode Return to the timer modeOverlapping programmes blink on the TV screen Cancel or change programme settingConfirm the overlapping programmes Select the programme to modifyRecording mode Programme RecordingBefore performing the following steps 36 EN NavigationLoad a recorded cassette Access the Main Menu screenNavigation Playback Programme Navigation Screen38 EN Edit Programme TitleSelect the programme Example Enter JVC News Entering CharacterDelete Tape Data Delete the tape data40 EN Edit From a CamcorderStart the source player Set the input mode of recording deckAnother Video Recorder Advantages of S-VHS video recordersConnecting To a Satellite Receiver Make connections Connecting/Using a Stereo SystemSelect the mode setting Mode SetAccess the Mode Set screen Select the modeWe recommend that you set Digital TBC/NR to on when Using this video recorder as the source player for editingPowered back on Picture reproduction is also linked to this functionSet PROG. Navigation to OFF While timer-recording in SP mode46 EN ScreenPanel. Then, set S-VHS to OFF. The S-VHS indicator goes off Correction to the luminance signal to enhance detailS-VHS recording mode is selected SettingAbout Ntsc Playback 48 ENGuide Program Number Showview System SetupAccess the Initial Set screen Guide Program Number SetAuto Channel Set Access the Auto Channel Set screenTuner Set 50 ENPerform Auto Channel Set View the Confirmation screenPress OK Manual Channel Set 52 ENDelete a channel Delete a ChannelChange Station Channel Position Select the item54 EN Set Stations aSet Stations B Station Name TV Station And ID ListAccess the Clock Set screen Clock Set56 EN Start the clock operation Set the date and timeSet Just Clock Set the source channel position for clock data58 EN Video Channel SetPower Recording 60 ENOther Problems Playback 62 ENLines S-VHS Signal-to-noise ratio 45 dB Horizontal resolutionScan system Lines VHS64 EN Memo 66 EN