JVC SR-V10E specifications 22 EN, Super VHS ET S-VHS ET, Receiving Stereo and Bilingual Programmes

Page 22

22 EN

RECORDING (cont.)

Super VHS ET (S-VHS ET)

—Recording on VHS cassettes with S-VHS quality

You can record in SP mode on VHS cassettes with S-VHS picture quality. You can play back a tape recorded using the S-VHS ET function on most of S-VHS recorders and of VHS recorders equipped with SQPB (S-VHS QUASI PLAYBACK) function. (Notice some recorders are not compatible with the S-VHS ET function.)

●You can activate the S-VHS ET function only before you start recording on a VHS cassette.

●Before recording, make sure that “B.E.S.T.” is set to “ON”. ( pg. 45)

Engage the S-VHS ET mode.

Press S-VHS ET on the recorder. You can check the current setting (“S-VHS ET : ON” or “S-VHS ET : OFF”). If “S-VHS ET : OFF” appears on the TV screen, press S-VHS ET again in about 5 seconds to set it to “ON”.

●The S-VHS indicator lights up on the front display panel.

NOTES:

●You cannot activate the S-VHS ET function ...

... while recording is in progress.

... while timer-recording ( pg. 28, 30, 32) is in progress.

... while B.E.S.T. ( pg. 23) is in progress.

●The S-VHS ET function does not work ...

... with S-VHS cassettes.

... with recordings in LP/EP mode.

●To keep the highest quality recording and playback pictures over a long period of time, S-VHS recording on S-VHS cassettes is recommended.

●Use of high grade tapes is recommended for S-VHS ET recordings. On some tapes, picture quality will not improve even if the S-VHS ET function is used. Check the recording quality before you start important recordings.

●While playing back a tape recorded using the S-VHS ET function on some recorders, noise may appear. (If playback picture becomes blurred or interrupted, use a cleaning cassette.)

●In the high-speed search, still, slow-motion or frame-by-frame playback modes ( pg. 16), noise may appear. If these modes are performed frequently on a tape recorded using the S-VHS ET function, the tape may be damaged and the picture may be deteriorated.

Receiving Stereo and Bilingual Programmes

Your recorder is equipped with a Sound-Multiplex decoder (A2) and a Digital stereo sound decoder (NICAM) making reception of stereo and bilingual broadcasts possible.

When the channel is changed, the type of broadcast being received will be displayed on the TV screen for a few seconds.

Type of Broadcast Being

On-screen Display

Received

 

 

 

 

A2

Stereo

ST

A2

Bilingual

BIL.

Regular Monaural

(none)

NICAM Stereo

ST NICAM

NICAM Bilingual

BIL. NICAM

NICAM Monaural

NICAM

 

 

 

●To listen to a stereo programme, press AUDIO on the remote control until “HIFI L j h R” appears on the TV screen.

●To listen to a bilingual programme, press AUDIO on the remote control until “HIFI L j” or “HIFI h R” appears on the TV screen.

●To listen to the standard (Regular Monaural) audio while receiving a NICAM broadcast, press AUDIO on the remote control until “NORM” appears on the TV screen.

NOTE:

“O.S.D. (PLAY)” must be set to “ON”, or the on-screen displays will not appear ( pg. 46).

When you change the setting in stop mode, set “O.S.D. (REC)” to “ON” ( pg. 45) first. Then set “O.S.D. (REC)” to “OFF” if you do not want to record the operational indicators displayed on the TV screen.

To Record Stereo and Bilingual Programmes (A2)

Stereo programmes are automatically recorded in stereo on the Hi-Fi audio track (with the normal audio track recording mixed L and R channel sound).

●Bilingual programmes are automatically recorded in bilingual on the Hi-Fi audio track. The main soundtrack will be recorded on the normal audio track.

To Record NICAM Stereo and Bilingual Programmes

The NICAM audio programme will be recorded on the Hi-Fi audio track, and the standard audio programme will be recorded on the normal audio track.

NOTES:

●If the quality of stereo sound being received is poor, the broadcast will be received in monaural with better quality.

●Before playing back a programme recorded in stereo, or a bilingual programme, refer to “Soundtrack Selection” on page 18.

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Connector cover Front ViewClose the battery cover until it clicks in place Rear ViewFront Display Panel ON-SCREEN Display Remote Control How To Use Operating JVC TVsSituate the recorder Check the contents10 EN Connect the recorder to TV8To connect to a TV with S-VIDEO/AUDIO in connectors Video ConnectionTurn on the recorder Auto Set Up12 EN Select your countryWith RF connection Perform Auto Set UpConfirm/Set video channel With AV or S-VIDEO connectionJust Clock Results of Auto Set Up appear on the front display panel14 EN Last-Function MemoryBasic Playback High-Speed Turbo Search 16 ENSlow Motion Pause during playbackIndex Search Mode Lock To prohibit any operations during playbackVariable Speed Search Skip SearchRepeat Playback 18 ENNext Function Memory Manual TrackingSet the tape speed Recording Resume FunctionChoose a programme Start recordingWatching Another Mode Lock To prohibit any operations during recording20 EN Accidental erasure preventionTape Remaining Time Repeat RecordingSuper VHS ET S-VHS ET Engage the S-VHS ET mode22 EN Receiving Stereo and Bilingual ProgrammesPlayback RecordingSR-V10E-1 Series Playback24 EN SR-V10E-2Turn on all components Make connectionsLoad cassettes Start playback Series Recording 26 ENPress 7on either of SR-V10E Set the input mode on both SR-V10EPrepare for recording Start recording Press 0on the SR-V10E which is recordingBefore performing the Showview Timer Programming Access the Showview screenAccess the Showview Program screen 28 ENEngage the recorder’s timer mode Set the VPS/PDC modeAccess the Title Edit screen Enter the programme titleExpress Timer Programming 30 ENEnter the channel position To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Press PR+32 EN Enter the programme modeBefore performing the 24 Hour Express Timer Programming Set the programme start/stop time and channelReturn to the timer mode Cancel or change a programmeDisengage the timer mode Access the Programme Check screen/displaySelect the programme to modify Cancel or change programme settingConfirm the overlapping programmes Overlapping programmes blink on the TV screenProgramme Recording Recording modeBefore performing the following steps Navigation 36 ENProgramme Navigation Screen Access the Main Menu screenNavigation Playback Load a recorded cassetteEdit Programme Title 38 ENSelect the programme Delete the tape data Entering CharacterDelete Tape Data Example Enter JVC NewsEdit From a Camcorder 40 ENAdvantages of S-VHS video recorders Set the input mode of recording deckAnother Video Recorder Start the source playerConnecting To a Satellite Receiver Connecting/Using a Stereo System Make connectionsSelect the mode Mode SetAccess the Mode Set screen Select the mode settingPicture reproduction is also linked to this function Using this video recorder as the source player for editingPowered back on We recommend that you set Digital TBC/NR to on whenScreen While timer-recording in SP mode46 EN Set PROG. Navigation to OFFSetting Correction to the luminance signal to enhance detailS-VHS recording mode is selected Panel. Then, set S-VHS to OFF. The S-VHS indicator goes off48 EN About Ntsc PlaybackGuide Program Number Set Showview System SetupAccess the Initial Set screen Guide Program Number50 EN Access the Auto Channel Set screenTuner Set Auto Channel SetView the Confirmation screen Perform Auto Channel SetPress OK 52 EN Manual Channel SetSelect the item Delete a ChannelChange Station Channel Position Delete a channelSet Stations a 54 ENSet Stations B TV Station And ID List Station NameClock Set Access the Clock Set screen56 EN Set the source channel position for clock data Set the date and timeSet Just Clock Start the clock operationVideo Channel Set 58 ENPower 60 EN RecordingOther Problems 62 EN PlaybackLines VHS Signal-to-noise ratio 45 dB Horizontal resolutionScan system Lines S-VHS64 EN Memo 66 EN
Top Page Image Contents