JVC SR-V10E specifications Rear View, Close the battery cover until it clicks in place

Page 5

EN 5

REAR VIEW

AMains Power Cord pg. 10 B S VIDEO OUT Connector

pg. 11, 24, 26, 41, 42

CS VIDEO IN Connector pg. 24, 26, 41, 42 D Lithium battery compartment See below E REMOTE OUT Connector pg. 24, 26

F AUDIO/VIDEO OUT Connectors

pg. 10, 24, 26, 41, 42, 43

Installing/Removing the lithium battery

GAUDIO/VIDEO IN Connectors

pg. 24, 26, 35, 41, 42

HANT. IN Connector pg. 10

IREMOTE IN Connector* pg. 24, 26

*For the Remote Control Unit RM-G30 (not provided)

JRF OUT Connector pg. 10

Be sure to connect the power plug to an main outlet first before installing the lithium battery; otherwise, the battery’s service life will be drastically shortened.

A Make sure that the power plug is connected to an main outlet and turn off the recorder power.

B Open the battery cover while pressing the release tab as illustrated.

C Insert a lithium battery with the plus (+) side up and push it in.

● To remove the lithium battery, press the latch downward using a pointed non-metallic object, then pull out the lithium battery.

D Close the battery cover until it clicks in place.

A

Image 5

Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Connector coverRear View Close the battery cover until it clicks in placeFront Display Panel ON-SCREEN Display Remote Control Operating JVC TVs How To Use10 EN Check the contentsSituate the recorder Connect the recorder to TVVideo Connection 8To connect to a TV with S-VIDEO/AUDIO in connectors12 EN Auto Set UpTurn on the recorder Select your countryConfirm/Set video channel Perform Auto Set UpWith RF connection With AV or S-VIDEO connection14 EN Results of Auto Set Up appear on the front display panelJust Clock Last-Function MemoryBasic Playback Slow Motion 16 ENHigh-Speed Turbo Search Pause during playbackVariable Speed Search Mode Lock To prohibit any operations during playbackIndex Search Skip SearchNext Function Memory 18 ENRepeat Playback Manual TrackingChoose a programme Recording Resume FunctionSet the tape speed Start recording20 EN Mode Lock To prohibit any operations during recordingWatching Another Accidental erasure preventionRepeat Recording Tape Remaining Time22 EN Engage the S-VHS ET modeSuper VHS ET S-VHS ET Receiving Stereo and Bilingual ProgrammesRecording Playback24 EN Series PlaybackSR-V10E-1 SR-V10E-2Load cassettes Start playback Make connectionsTurn on all components 26 EN Series RecordingPrepare for recording Start recording Set the input mode on both SR-V10EPress 7on either of SR-V10E Press 0on the SR-V10E which is recordingAccess the Showview Program screen Access the Showview screenBefore performing the Showview Timer Programming 28 ENAccess the Title Edit screen Set the VPS/PDC modeEngage the recorder’s timer mode Enter the programme title30 EN Express Timer ProgrammingVPS/PDC Recording To Timer-Record Weekly Or Daily SerialsEnter the channel position Press PR+Before performing the 24 Hour Express Timer Programming Enter the programme mode32 EN Set the programme start/stop time and channelDisengage the timer mode Cancel or change a programmeReturn to the timer mode Access the Programme Check screen/displayConfirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Overlapping programmes blink on the TV screenBefore performing the following steps Recording modeProgramme Recording 36 EN NavigationNavigation Playback Access the Main Menu screenProgramme Navigation Screen Load a recorded cassetteSelect the programme 38 ENEdit Programme Title Delete Tape Data Entering CharacterDelete the tape data Example Enter JVC News40 EN Edit From a CamcorderAnother Video Recorder Set the input mode of recording deckAdvantages of S-VHS video recorders Start the source playerConnecting To a Satellite Receiver Make connections Connecting/Using a Stereo SystemAccess the Mode Set screen Mode SetSelect the mode Select the mode settingPowered back on Using this video recorder as the source player for editingPicture reproduction is also linked to this function We recommend that you set Digital TBC/NR to on when46 EN While timer-recording in SP modeScreen Set PROG. Navigation to OFFS-VHS recording mode is selected Correction to the luminance signal to enhance detailSetting Panel. Then, set S-VHS to OFF. The S-VHS indicator goes offAbout Ntsc Playback 48 ENAccess the Initial Set screen Showview System SetupGuide Program Number Set Guide Program NumberTuner Set Access the Auto Channel Set screen50 EN Auto Channel SetPress OK Perform Auto Channel SetView the Confirmation screen Manual Channel Set 52 ENChange Station Channel Position Delete a ChannelSelect the item Delete a channelSet Stations B 54 ENSet Stations a Station Name TV Station And ID List56 EN Access the Clock Set screenClock Set Set Just Clock Set the date and timeSet the source channel position for clock data Start the clock operation58 EN Video Channel SetPower Recording 60 ENOther Problems Playback 62 ENScan system Signal-to-noise ratio 45 dB Horizontal resolutionLines VHS Lines S-VHS64 EN Memo 66 EN