Playback (cont'd)
Instant ReView
REVIEW |
|
|
|
+ |
| 000 | 0 |
| 000 | 0000 | |
| 0 | 000 | |
| 000 |
| 0000 |
| 000 |
| 0 |
– | 000 |
| 000 |
000 | 000 | ||
| 00 | 00 | |
INDEX INDEX
MARK ERASE
Simply by pressing a single button, the VCR power comes on, rewinds, and begins playback of the last recording. This makes it easier to "review" the program you have
When the VCR power is off:
1Press REVIEW.
■After the VCR power comes on, the tape will be rewound to the beginning of the last recording (where the index code is placed) and playback will start automatically.
■To play back a recording located 2 index codes away, press REVIEW twice. You can access any one of up to 9 index codes.
■ReView is not possible while the VCR is in the Timer mode.
■The VCR's REVIEW button lights when
1 2 3
4 5 6
7 8 9
0
| Index Search |
| Index codes are electronic "bookmarks" which are automatically |
| placed on the tape whenever recording is started. Index Search |
| automatically seeks out these index codes so you can easily find the |
SEARCH | beginning of a recording (up to 9 index codes away in either direction). |
T/Y | During Stop.... |
| 1 Press SEARCH Tor Y. "INDEX |
| will be displayed and search will begin in the corresponding |
| direction. |
| 2 If you wish to access index codes 2 through 9, press SEARCH |
| Tor Yrepeatedly until the correct index number is |
| displayed. |
| ■ When the specified index code is found, playback will start |
| automatically. |
|
|
Manual Index Mark/Erase
TO MARK AN INDEX CODE
During Playback...
1Press INDEX MARK.
■The VCR will mark an index code at that location.
■"MARK" blinks while an index code is being marked.
TO ERASE AN INDEX CODE
During Playback or Still...
1Press INDEX ERASE.
■The VCR will
■"ERASE" blinks while an index code is being erased.
20