JVC HR-IP820U instruction manual To Make Corrections

Random Assemble Editing utilizes the same memory space as the VCR's timer; so the number of sequences available to this function may not be 8, depending on how many programs are already stored in memory.

■ Example: Only sequences 1 – 5

are available because three programs are stored in the timer memory.

MEMORY CAPACITY

R.A. EDIT ⮕ 1

2

3

4

5

EDIT MODE

HR-IP820U-EN-2 97.5.20 5:33 PM Page 35

$ Insert a cassette (with safety tab

intact) into the recording deck,				R.A. EDIT		SEARCHING
		⮕		1	0:02:23	0:02:51
and put the recording deck in			2		0:10:20	0:21:40
			3		0:03:16	0:05:39
the Record-Pause mode.	4				0:25:33	0:25:47
	5				0:56:21	1:00:36
% Press R.A.EDIT START.	6
	7
■ The function begins automatic	8					CNT 0:02:30
editing; all the specified scenes				TTL 0:18:40
are copied to the recording
deck in sequential order.				R.A. EDIT		EDIT MODE
■ The on-screen display remains	1				0:02:23	0:02:51
	2				0:10:20	0:21:40
superimposed while your VCR	3				0:03:16	0:05:39
	4				0:25:33	0:25:47
searches for each scene (the			5		0:56:21	1:00:36
		⮕		6
blinking cursor points to the			7
scene number presently being	8
				TTL 0:18:40		CNT 1:00:36

searched), and is not displayed while the scenes are being edited.

■While a scene is being searched, the recording deck automatically enters the Record-Pause mode . "SEARCHING" appears on the screen.

■When Random Assemble Editing is finished, your VCR enters the Still mode, the recording deck enters the Record- Pause mode, and the cursor blinks at the next available scene number.

^Press MENU as many times as necessary to exit.

&Press STOP on both decks to end Random Assemble Editing.

"ERROR" WARNING

If you choose "AV COMPU-LINK"
by mistake in step 6 and then reach	-ERROR-
the R.A. EDIT screen in step 10,	CHOOSE SPECIAL FUNCTION
	ON MAIN MENU AND SELECT
the "ERROR" display will appear	R.A. EDIT/PAUSE
	BEFORE YOU BEGIN
as shown on the right.
	R.A. EDIT
Be sure to choose "R.A. EDIT/
PAUSE" in step 6 to perform	PRESS (MENU) TO MAIN MENU
Random Assemble Editing.

TO MAKE CORRECTIONS

During step 11 or 12, you can
correct a cut-in or cut-out point				R.A. EDIT		EDIT MODE
using the remote control. Each time	1				0:02:23	0:02:51
			2		0:10:20	0:21:40
the CANCEL button is pressed, the		⮕		3
			4
immediately preceding point is			5
	6
cleared and can be reset.	7
	8
				TTL 0:11:48		CNT 0:21:40

■Example: The cut-out point for "2" can be changed by pressing CANCEL once (to clear it) and re-setting it. By pressing CANCEL more times, you can back up to previous points for re-setting, but all points in between will be cleared in the process. (e.g. To reach the cut-out point for "1", the cut-in and - out points for "2" will be cleared.)

TTL 0:00:00 CNT 0:01:30

■ Example: The "PROGRAM

FULL" screen appears when the	R.A. EDIT	EDIT MODE
timer memory is full (all 8	PROGRAM FULL
programs are used). To cancel a
program, ☞ p. 30.
	TTL 0:00:00	CNT 0:01:30

OPTIONAL RM-V403U MULTI-

BRAND R.A.EDIT CONTROLLER

By connecting this controller to your VCR's R.A.EDIT Connector, Random Assemble Editing will become possible in conjunction with a second non-JVC VCR. The controller is compatible with various major VCR brands — convenient especially if you already own a VCR other than JVC. For compatible systems and availability, please consult your JVC dealer.

NOTE:

You can also monitor the sound when searching for scenes you want to edit in steps 11 – 12.

Since you can hear the soundtrack during selection, you can avoid abrupt or unnatural sounding scene-to-scene connections.

USING INDEX SEARCH WITH RANDOM ASSEMBLE EDITING

In step 11, Index Search can also be used to locate your edit points. When used, "INDEX" and the index number will appear on the R.A.Edit screen. For Index Search ☞ p. 20.

■Using Index Search during R.A.Edit will result in a reduction in accuracy.

■This function requires that index marks are previously recorded on your tape at the desired edit points.

35