Finding A Program (cont'd)
NOTE: If you press PLAY or STOP while the directory appears, and for some reason the VCR cannot find the program you selected on the inserted tape, the following screen appears to tell you this.
SORRY,
PROGRAM COULD NOT
BE FOUND
Tape Number Search
In this case the VCR uses the Tape Number to find the desired program. All tapes recorded on an INDEX Plus+ VCR, and those indexed using INDEX Plus+, have Tape Numbers.
1Follow the instructions in the box under "Searching For a Program" on page 16 to access the FIND screen.
FIND
1TITLE
2 TAPE#
NO CASSETTE
PRESS(1)or(2)
PRESS(INDEXPlus+)TO EXIT
Press 2.
2The TAPE# screen appears.
TAPE#
[
]
PRESS(DIGITS)
THEN PRESS(ENTER)
PRESS(CLEAR)TO MAKE
CORRECTION
PRESS(CANCEL)TO RETURN
Input the Tape Number using the DIGIT buttons. Press CLEAR to make corrections, or CANCEL to quit the process. Once the number is input, press ENTER.
3 a If the number you input is not in the VCR's
memory, the following screen appears:
NO DIRECTORY
AVAILABLE FOR TAPE#0123
PRESS(CANCEL)TO RETURN
PRESS(INDEXPlus+)TO EXIT
Press CANCEL to return to the TAPE# screen, then perform step 2 again.
3 b If the number you input is accepted, the directory corresponding to the Tape Number you entered appears. Insert the correct tape and, after selecting the desired program using the CURSOR button (VOL
4The following screen appears to let you know the VCR is searching the tape for your program:
SEARCHING FOR...
TIGERS VS GIANTS
PRESS(CANCEL)TO CANCEL
5Normally the VCR finds your program quickly and starts playback from the begnning of the selected program, or stops at that point.
NOTE: If you press PLAY or STOP while the directory appears, and for some reason the VCR cannot find the selected program on the inserted tape, the following screen appears to tell you this.
SORRY,
PROGRAM COULD NOT
BE FOUND
18