Recording
POR INSTRUCCIONES EN ESPAÑOL VEA p. 40 – 41.
TV signals being received by the VCR's
POWER ON; SELECT CHANNEL
3 OR 4 (OR AV MODE)
+ |
| 000 | 0 |
| 000 | 0000 | |
| 0 | 000 | |
| 000 |
| 0000 |
| 000 |
| 0 |
– | 000 |
| 000 |
000 | 000 | ||
| 00 | 00 | |
1
TV/VIDEO
1 | 2 | 3 |
|
4 | 5 | 6 | Digit keys |
|
|
| |
7 | 8 | 9 |
|
ENTER/ | 0 |
| C. RESET |
OSD |
|
|
|
3 |
|
| 2 |
6
4 
7
5
LOAD A CASSETTE
1 Insert a cassette with the safety tab present.
■The VCR power will come on automatically.
■"READING TAPE#..." will appear on the screen unless INDEX Plus+ functions are set to OFF. (☞ p. 12 of INDEX Plus+ instruction manual.)
■If watching on channel 3 or 4 be sure that the VIDEO indicator is lit. If the indicator is not lit, press TV/VIDEO so that it lights.
CHOOSE A PROGRAM
2 Press CH(annel) +/– (or the digit keys followed by ENTER) to select the channel you wish to record.
■Even if you don't press ENTER, the channel will automatically change in about 2 seconds.
SET THE TAPE SPEED
3 Press SP/EP.
TO START RECORDING
4 Press REC and PLAY simultaneously.
■If "PLEASE ENTER THE CABLE BOX CH NUMBER" appears on the screen, input the cable box channel using the digit keys, then press ENTER.
■If "TAPE# CAN NOT BE READ" appears on the screen, refer to page 13 of INDEX Plus+ instruction manual.
TO PAUSE RECORDING
5 Press PAUSE.
6 Press PLAY to resume recording.
TO STOP RECORDING
7 Press STOP.
To watch a program while recording another
During Recording...
1Press TV/VIDEO. The VCR's VIDEO indicator and the TV broadcast being recorded will disappear.
2Use the channel controls on the TV to select the other channel you wish to view.
■The program selected with the TV channel controls will appear on the TV screen while the one selected with the VCR channel controls will be recorded on the tape.
To display the elapsed recording time
Before starting recording...
1Press C. RESET.
■The counter will be reset to "0H 00M 00S", and will show the exact elapsed time as the tape runs.
2After starting recording, press OSD at any time to check the elapsed time on the TV screen.
3Press OSD again to clear it from the screen.
23