JVC HR-IP820U Preferred Channel Selection, Index Plus+ Initial Settings, Procedure

HR-IP820U INDEX Plus+ 97.5.20 5:45 PM Page 8

Preparing To Use INDEX Plus+ (cont'd)

Preferred Channel Selection

Your VCR can receive program title and CSPG data from as many as 25 different stations. Select the stations from which you want to receive this data.

Preparation

1.Turn on the power to the TV and the VCR.

2.Set the TV to the channel or mode appropriate for video playback.

3.Perform the Download Scanning procedure (see page 6).

Procedure

1 Press MENU twice. The Main Menu screen appears.

2 Press SET to select "SET-UP MENU", then press

SELECT.

3 Press SET to select	DOWNLOAD FUNCTION SETUP￿
"DOWNLOAD	￿
FUNCTION SETUP",		DOWNLOAD FUNCTION￿
		ZIP CODE￿
then press SELECT. The		TIME ZONE￿
		ANTENNA CONNECTION￿
screen to the right
		PREFERRED CHANNEL￿
appears:	￿
	PRESS(SELECT,SET+/-)￿
	(0):SCHEDULE (MENU):END

4Press SET to select "PREFERRED CHANNEL", then press SELECT. The following screen appears:

				PREFERRED CHANNEL￿
		2		CH 02 KABC:￿
GUIDE CH	5			CH 05	CBS :PREFER￿
			9	CH 09	NBC :￿
	13			CH 13	KCET:PREFER￿
	23			CH 23	CNN :￿

VCR CH	￿	Station name
	(SET+/-)TO SELECT CH￿
	(SELECT)TO ALTER SETTING￿
	PRESS(MENU) TO END

INDEX Plus+ Initial Settings

The HR-IP820U, using download data from the host station, sets its own clock automatically. The set-up procedure is described below.

Also explained in this section is the selection procedure for end-of-program options.

Preparation

1.Turn on the power to the TV and the VCR.

2.Set the TV to the channel or mode appropriate for video playback.

Procedure

Automatic Clock Set

1Press MENU twice to select "MAIN MENU".

2Press SET to select "SET-UP MENU", then press

SELECT.

3 Press SET to select		INDEX PLUS+ INITIAL SET￿
"INDEX PLUS+ INITIAL	￿
SET", then press	￿
		AUTOMATIC CLOCK SET￿
SELECT. The screen to		PROGRAM END SELECTION￿
the right appears:		INDEX PLUS+ FUNCTIONS￿
	￿
	￿
		PRESS(SELECT,SET+/-)￿
		PRESS(MENU) TO END

NOTE: In the INDEX Plus+ INITIAL SET screen, the INDEX PLUS+ FUNCTIONS option does not appear during recording.

4 Press SET to select	AUTOMATIC CLOCK SET￿
"AUTOMATIC CLOCK	￿
SET", then press	￿
		ON￿
SELECT. The screen to		OFF￿
the right appears:	￿
	￿
	￿
	PRESS(SET+/-) FOR CHOICE￿
	PRESS(MENU) TO END

NOTE: If you haven't yet performed the Download Scanning procedure, the screen to the right appears:

AUTO CHANNEL MAPPING￿

ERROR￿

￿

￿

YOU MUST SET￿

CHANNEL MAPPING￿

MANUALLY￿

￿

￿

PRESS(MENU)TO END￿

￿

5Press SET to select either "ON" or "OFF". Selecting ON allows automatic clock setting, while choosing OFF disables the function.

NOTES:

● When AUTOMATIC CLOCK SET is enabled, the

clock's accuracy may vary slightly, depending on the

data received from the host station.

Go to page 6 and perform the Host Station Download Scanning procedure, then return to step 1 on this page and begin the Preferred Channel Selection procedure.

5Press SET to choose a channel from which you want to receive CSPG data, then press SELECT. "PREFER" appears on the right side of the screen. Repeat the procedure for each desired channel (the maximum being 25).

NOTES:

●If the station name is not displayed, you cannot make that a preferred channel.

●If a non-preferred channel is sending its own CSPG, you can obtain the data.

● The INDEX Plus+ memory backup allows the

memory to remain active for 24 hours without

power. In the event of a power failure, or if the

power cord is unplugged, as long as power is

restored to the VCR within 24 hours of the initial

outage, the clock is automatically set regardless of

the selection you made in step 5. If you don't

restore power to the VCR within 24 hours, the clock

returns to its initial setting ("AM 12:00" blinking).

6Press MENU. The INDEX PLUS+ INITIAL SET screen appears.

8