Editing
To edit to or from another VCR
| Recorder | Your VCR |
| |
| + |
| 000 | 0 |
|
| 00 | 0 | 00 |
|
| 000 |
| 0000 |
|
| 000 |
| 00 |
| – | 000 |
| 000 |
| 00 | 00 | ||
|
| 000 | 000 | |
VIDEO | AUDIO IN | Rear AUDIO IN | ||
IN |
| VIDEO IN |
| |
| or |
|
|
|
AUDIO OUT | VIDEO OUT |
Your VCR can be used as either the recording deck or the source player when editing tapes.
PREPARATION
1Connect the player's VIDEO OUT and AUDIO OUT connectors to the recorder's VIDEO IN and AUDIO IN connectors.
■When using your VCR as a recorder and connecting it to a monaural deck, connect that deck's AUDIO OUT connector to your VCR's AUDIO IN L connector.
OPERATION
2Press MENU, SET, and
SELECT as many times as necessary to access the AUX INPUT screen. (☞ p. 7)
3Press SET to choose "FRONT"
or "REAR".
■ Select FRONT to connect to the front panel connectors.
■Select REAR to connect to the rear panel connectors.
4Press MENU as many times as necessary to exit.
5Set the recorder's input mode to AUX.
■With this VCR model, press the digit key "0". "AU" will appear instead of a channel number.
Player | Another VCR |
FOR ASSEMBLE EDITING
Assemble editing adds one recorded scene to another in
succession. To use your VCR as the recording deck...
6Load the source tape in the player, and the recording tape in your VCR.
7Select the recording speed (SP or EP).
8Put your VCR in the
9Play back the source tape to search for a scene to be edited.
0Press the recorder's PLAY button where you want to start editing.
! Press the recorder's PAUSE button to stop editing. @ Repeat steps 9 through 11 to continue editing.
(Assemble Editing is also possible using your VCR as the playback deck.)
FOR INSERT EDITING
Insert editing replaces part of the recorded scene with new material. Both the picture and
6Load the source tape in the player, and the recording tape in your VCR.
7Play back the recording tape and engage the Still mode at the
8Press INSERT.
■Your VCR enters the
■The TV screen changes from the still picture to the input signal you are going to record.
9Play back the segment of the source tape to be inserted.
0Press PLAY on the recorder.
■Insert editing will start. (PLAY and REC are displayed on the FDP.)
!Press PAUSE on the recorder to stop insert editing.
■Do not press STOP to stop insert editing, otherwise the picture will be distorted at the switching point between the newly inserted and previously recorded pictures.
FOR AV INSERT EDITING
If you want to replace the picture,
In step 8 above, after you press INSERT, press A. DUB. also. (REC and PLAY blink and PAUSE lights up on the FDP.)
32