Recorder | Your VCR |
+ |
| 000 | 0 |
| 00 | 0 | 00 |
| 000 |
| 0000 |
| 000 |
| 00 |
– | 000 |
| 000 |
00 | 00 | ||
| 000 | 000 | |
|
| To the rear panel | |
VIDEO | AUDIO | PAUSE/SPECIAL | |
FUNCTION connector | |||
IN | IN | ||
|
| ||
|
| (JVC camcorder only) | |
|
| AUDIO OUT |
Camcorder
VIDEO OUT EDIT
Player
+ |
| 000 | 0 |
| 00 | 0000 | |
| 0 | 00 | |
| 000 |
| 000 |
| 0000 |
| 000 |
– | 000 |
| 000 |
00 | 00 | ||
| 000 | 000 | |
A.DUB
Audio conponent (CD player etc.)
NOTES:
■After audio dubbing, the normal audio track remains selected. To hear the
■Audio dubbing is possible using the rear connectors.
■The AUX INPUT must be selected as the audio source.
■Audio dubbing will stop automatically at the counter reading of "0:00:00", and the recorder will enter the Play mode. Check the counter before starting audio dubbing.
To edit from a camcorder
PREPARATION
1Connect the camcorder's VIDEO OUT and AUDIO OUT connectors to the VCR's front panel VIDEO IN and AUDIO IN connectors. If using a master edit control equipped JVC camcorder connect the PAUSE/SPECIAL FUNCTION connector on the rear of the VCR to the REMOTE/EDIT
OUT connector on the comcorder.
■Use the L connector for
monaural connection.
■ When a Master Edit Control- equipped JVC camcorder is used, the camcorder is capable of controlling your VCR.
1 Press MENU, SET, and SELECT as many times
as necessary to access the SPECIAL FUNCTION screen. (☞ p. 7)
2Press SET to choose "R.A.EDIT/PAUSE".
3Press MENU as many times as necessary to exit.
●Refer to camcorder's instruction manual for
OPERATION
2Press MENU, SET and
SELECT as many times as necessary to access the "AUX INPUT" screen. (☞ p. 7)
3Press SET to choose "FRONT".
4Press MENU as many times as
necessary to exit.
5Set the VCR's input mode to
AUX by pressing digit key "0". "AU" will appear instead of a channel number.
6Put the camcorder in the Play mode.
7Put the VCR in the Record mode.
●Refer to the camcorder/recorder's instruction manual for operation instructions.
Audio Dubbing
Audio Dubbing replaces the normal audio sound of a previously recorded tape with a new soundtrack.
PREPARATION
1Connect an audio component to the recorder's front panel AUDIO L, R connectors. (For monaural equipment, use the L connector.)
OPERATION
2Press MENU, SET and SELECT as many times as necessary to access the "AUX INPUT" screen. (☞ p. 7)
3Press SET to choose "FRONT".
4Press MENU as many times as necessary to exit.
5Set the VCR's input mode to AUX by pressing digit key "0". "AU" will appear instead of channel number.
6Start playback and engage the Still mode at the point from which you wish to start audio dubbing.
7Press A. DUB.
■Your VCR enters the Audio
8Start playback of the audio source, and then press PLAY.
■Audio dubbing will start. (REC blinks and PLAY is displayed on the FDP.)
9Pressing PAUSE temporarily stops audio dubbing.
0Press STOP to stop audio dubbing.
33