Revising/Erasing Directories
In addition to entering various information into directories, you can change Title and Tape Number information. You can also erase an entire directory you don't need anymore, or when you need to clear memory space for new directories.
Preparation
1.Turn on the power to the TV and the VCR.
2.Set the TV to the channel or mode appropriate for video playback.
The process begins from the "REVISE" screen, and the method for accessing this screen depends on whether or not there's a tape in the machine.
1 If a tape is already inserted, press INDEX Plus+ to access its directory, and press F2.
2If no tape is loaded, press INDEX Plus+ and the FIND screen (page 17) appears. Press 2 (TAPE#) and enter the Tape Number of the tape with the directory you want to revise. Then press ENTER, and that tape's directory appears. Press F2 to bring up the REVISE screen.
The procedures for revising/erasing directories are explained in the following pages.
Title Changes
Procedure
1Follow the instructions in the box above for accessing the REVISE screen. When it appears, press 1.
REVISE
1TITLE
2 TAPE#
3 ERASE DIRECTORY
PRESS(1),(2)or(3)
PRESS(CANCEL)TO RETURN
2The REVISE TITLE screen appears.
|
| REVISE | TITLE |
| |
> |
| PORTS |
| #0013 | |
| |||||
SWALLOWS VS | BAYS | 30 | SP | ||
SUPER JAPAN | CUP | 80 | EP | ||
DYNAMIC SOCCER | 120 | EP | |||
|
|
| |||
|
|
| |||
(CANCEL):EXIT | PAGE01 | ||||
(ENTER):STORE (<<) (>>) 
UNDO 
INS 
DEL 
small
ENT:STORE <<:TOP >>:END
UNDO 
INS 
DEL 
CAPS
Here you can make changes to any or all of the program names. A flashing frame appears on the first letter of the first title. Move the frame by pressing the CURSOR buttons (REW = LEFT, FF = RIGHT, VOL+
=UP, VOL– = DOWN). Place the frame on the letter you want to change and input the new letter using the DIGIT buttons. Then press ENTER to store. Pressing CANCEL returns you to the REVISE screen.
NOTES:
●Pressing ENTER stores the change and moves the cursor to the next line, or you can press the CURSOR button
●You can move to a different page by pressing CH
●Press SEARCH T to move the cursor to the beginning of the title, or SEARCH Y to move it to the end.
●As each of the other DIGIT keys represents multiple letters, the "0" key represents multiple symbols. The following symbols can be input by pressing the "0" button. By repeatedly pushing the "0" button the symbols can be selected in the following order: 0, !,
", #, $, %, &, ', (, ),*, +, ,,
Letters and numbers can be input using the JOG dial on the remote control. When using the JOG dial for this purpose, press the JOG/SHUTTLE button on the remote control so the light illuminates.
The use of the each of the FUNCTION buttons
F1 (UNDO): If, after inputting a new title, you find you changed the wrong one or you decide to change it again, press F1 before storing. The original title returns. F2 (INS): If you realize that you neglected to input a letter in the title, or if you want to insert a space, press F2. A blank space is inserted at the location of the frame. You can then input a new letter if you wish.
F3 (DEL): Pressing F3 deletes the letter highlighted by the frame.
Continued on next page.
19