JVC LPT0762-001B, HR-XVS20AA manual Auto Set Up, 16 EN

16 EN INITIAL SETTINGS (cont.)

Auto Set Up

The Auto Set Up simplifies installation by guiding you through the procedures of setting the clock and tuner channels — simply follow the on-screen menus that appear.

Before starting, make sure of the following:

●The TV aerial cable should be connected to the unit.

●The unit’s mains power cord should be connected to a mains outlet.

●The “Video Channel Set” ( pg. 15) should be performed

and the TV should be set to its AV mode (with AV or S-VIDEO connection  pg. 12) or UHF channel (with RF connection  pg. 12).

●Slide the TV/S-VHS/DVDswitch to the right.

A Turn on the unit.

Press 1 on the unit or remote control. The Clock Set screen appears on the TV screen.

B Set the time.

Press rt to set the hour, then press OK or e.

●Press and hold rt to change the time by 30 minutes.

	CLOCK SET
TIME	DATE	YEAR
0 : 00	01.01	03
[ / ]

[MENU] : EXIT

C Set the date.

Press rt to set the date, then press OK or e.

●Press and hold rt to change the date by 15 days.

D Set the year.

Press rt to set the year, then press SET UP MENU.

●Press and hold rt to change the year by 1 year.