JVC HR-XVS20AA, LPT0762-001B manual Guide Program Number Set, Access the Main Menu screen

(Example) If RTR is received on channel position 2.

[0–9] OR [ / ] : SELECT

[MENU] : EXIT

EN 31

G-CODE™/SHOWVIEW™ System Setup

The G-CODEtimer programming system eliminates the need to input channel, date, start and stop time data when setting the timer record function. Simply key in the G-CODEnumber for the TV programme you wish to record (found in most TV listings) and the unit’s timer is automatically programmed.

You have to set Guide Program numbers, which are assigned to each station for purposes of SHOWVIEW timer programming, for all the stations stored in your unit’s memory to get proper results.

Before G-CODEsetup you must have performed Auto Set Up (
pg. 16).

IMPORTANT

After setting the Guide Program Numbers, channel positions may be incorrect if you stored or skipped channels. In this case, re- perform Guide Program Number setting.

INFORMATION

G-CODEand SHOWVIEW are different trademarks used to represent the same easy recording feature, but only the term G-CODEsystem will be used in the instructions. If you use the SHOWVIEW system, follow the same instructions listed for the G-CODEsystem.

Turn on the TV and select the video channel (or

AV mode).

Guide Program Number Set

E Enter the receiving channel position number.

A Access the Main Menu screen.

Press SET UP MENU.

B Access the Initial Set screen.

Press rt to move the highlight bar (pointer) to “INITIAL SET”, then press OK or e.

C Access the Guide Program Set screen.

Then press rt or number keys to input the number of the unit’s channel position on which the Guide Program number’s broadcast is received by the unit. Then press OK or e.

●If the satellite broadcast is received on your unit’s auxiliary channel “L-1”, select “L-1” for the channel position.

●Repeat steps D and E as necessary.

G-CODE/SHOWVIEW SETUP

GUIDE PROG	TV PROG
2	5

Press rt to move the highlight bar (pointer) to “G-CODE/SHOWVIEW SETUP”, then press OK or e.

D Enter the Guide Program number.

F Return to the normal screen.

Press SET UP MENU.

Press rt or number keys to enter the Guide Program number for the desired station as shown in the TV listings. Then press OK or e.

G-CODE/SHOWVIEW SETUP

GUIDE PROG	TV PROG
2	5
[0–9] OR [ /	] : SELECT
[MENU] : EXIT

Guide Program Number

“Guide Program (GUIDE PROG) number” refers to the assigned TV station numbers, according to broadcast area, for the G-CODEtimer recording. The Guide Program numbers can be found in most TV listings.

(Example) When inputting the Guide Program number 2 for RTR.