JVC LPT0762-001B, HR-XVS20AA manual Safety Precautions, Use only discs marked with the following

Page 2

2 EN

SAFETY FIRST

Safety Precautions

The rating plate and the safety caution are on the rear of the unit.

WARNING: DANGEROUS VOLTAGE INSIDE

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTION

8When you are not using the unit for a long period of time,

it is recommended that you disconnect the power cord from the mains outlet.

8Dangerous voltage inside. Refer internal servicing to qualified service personnel. To prevent electric shock or fire hazard, remove the power cord from the mains outlet prior to connecting or disconnecting any signal lead or aerial.

ATTENTION (S-VHS deck only)

1.This unit can also receive SECAM colour television signals for recording and playback.

2.Recordings made of SECAM television signals produce monochrome pictures if played back on another video recorder of SECAM standard, or do not produce normal colour pictures if played back on another video recorder of PAL standard.

3.SECAM prerecorded cassettes or recordings made with a SECAM video recorder produce monochrome pictures when played back with this unit.

IMPORTANT

8Please read the various precautions on pages 2 and 3

before installing or operating the unit.

8It should be noted that it may be unlawful to re-record pre-recorded tapes, DVDs, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable programme and in any literary, dramatic, musical, or artistic work embodied therein.

CAUTION

A DVD/VCR IS A CLASS 1 LASER PRODUCT. HOWEVER THIS DVD/VCR USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE UNIT CORRECTLY AS INSTRUCTED.

WHEN THIS DVD/VCR IS PLUGGED INTO THE WALL OUTLET, DO NOT PLACE YOUR EYES CLOSE TO THE OPENING OF THE DISC TRAY AND OTHER OPENINGS TO LOOK INTO THE INSIDE OF THIS DVD/VCR.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

Use only discs marked with the following.

DVD

(8 cm /12 cm disc)

Video CDs

(8 cm /12 cm disc)

Audio CDs

(8 cm /12 cm disc)

Manufactured under license from Dolby Laboratories. “Dolby” and double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works.

© 1992-1997 Dolby Laboratories, Inc. All rights reserved.

Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 and other world-wide patents issued and pending. “DTS”is registered trademark of Digital Theater Systems, Inc.

Copyright 1996 Digital Theater Systems, Inc. All rights reserved.

Cassettes marked “S-VHS” and “VHS” can be used with this unit. However, S-VHS recordings are possible only with cassettes marked “S-VHS”.

By using the S- VHS ET function, it is possible to record and play back with S-VHS picture quality on VHS cassettes with this unit.

G-CODEis a trademark of Gemstar Development Corporation and is registered in the following countries: Australia, China, Hong Kong, Japan, South Korea, New Zealand, and Taiwan. SHOWVIEW is a trademark of Gemstar Development Corporation and is registered in the following countries: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Italy, Luxembourg, Netherlands, Norway, Poland, Portugal, Russia, Slovakia, South Africa, Spain, Sweden and Switzerland. The G-CODE/SHOWVIEWsystem is manufactured under license from Gemstar Development Corporation.

G-CODEand SHOWVIEW are different trademarks used to represent the same easy recording feature. However, for simplicity, only the term G-CODEwill be used in the instructions. If you use SHOWVIEW system, follow the same steps listed for the G-CODEsystem.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing users only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Image 2
Contents HR-XVS20AA Safety Precautions Use only discs marked with the followingTo mobile phone users Do not place the unitDo not block the unit’s ventilation openings or holes On placing the unitConnecting To a Satellite Receiver Safety PrecautionsRemote Control Functions Mode Set S-VHS deck Mode Set DVD deck Tuner Set Clock SetRegion Number About DiscsPlayable Discs Unplayable DiscsMarks related to video DVD Video MarksFile Structure of Discs Audio CD/Video CDOpen the disc tray Placing a DiscCare and Handling of Discs Place the discFront View Rear View On the tape 10 ENON-SCREEN Display S-VHS deck Remote Control How To UseSituate the unit Check the contents12 EN Connect the unit to TVVideo Connection 8To connect to a TV with S-VIDEO/AUDIO in connectorsPlug the end of the mains power cord into a mains outlet Component Video Connection 8To connect to a TV with Component Video in connectorsBack of TV Audio in connectors DVD deck onlyVideo Channel Set Access the Video Channel Set modeExit the Video Channel Set mode Set the video channelAuto Set Up 16 ENPress OK or e Select the TV systemStart Auto Channel Set DVD deck Monitor Set18 EN How to change the Scan mode Scan Mode SetAccess the DVD Set Up menu screen Press rt to move 0 to Progressive MODE, then press OKPress rt to move 0 to on Screen LANGUAGE, then press OK Language20 EN Press w e to select LanguageSee Language Code List  pg Press rt to move 0 to Menu LANGUAGE, then press OKLanguage Code List 22 ENBasic Playback High-Speed Turbo Search 24 ENSlow Motion Pause during playbackActivate Index Search Index SearchSkip Search To resume normal playback during a Skip Search, pressRepeat Playback 26 ENNext Function Memory Manual TrackingStart recording Choose a programmeSet the tape speed Pause/Resume recording28 EN Instant Timer Recording ITREngage the ITR mode Set the recording durationReceiving Stereo and Bilingual Programmes Reset the counterTape Remaining Time Set the counter displayRecording 30 ENPlayback Guide Program Number Set Access the Main Menu screenAccess the Initial Set screen Guide Program NumberProgramming Access the G-CODE/SHOWVIEWscreenBefore performing the G-CODE/SHOWVIEW Timer Programming 32 ENSatellite Receiver Users Access the G-CODEProgram screenEngage the unit’s timer mode Guide Program Number SetExpress Timer Programming 34 ENPress PR + To Timer-Record Weekly Or Daily SerialsEnter the channel position Press # TIMER, then press Disengage the timer modeAccess the Programme Check screen Press # Timer Cancel or change a programmeReturn to the timer mode 38 EN When programmes overlap each otherCancel or change programme setting Confirm the overlapping programmesProgramme Recording Recording modeIndicator Set the tape speedPause playback 40 ENLoad the disc Place the disc in the disc trayPlayback Control PBC Function Access the PBC menuStop mode During playback Press TOP MenuDVD menu Access the DVD menu42 EN Press TOP Menu or MenuResume Function Skip the item PlaybackHigh-Speed Search Digest Access the digest screen44 EN For DVD VideoPress Zoom during playback or while paused Strobe PlaybackZooming Press rt w e to move the zoomed-in scene3D Phonic Access the selection menu46 EN Select the effect levelVFP function Adjusting the picture quality Press Display twice whenever a disc is loaded Contents of the on-screen bar during playback48 EN Video CDSelect the option Access the on-screen barChange the time information Select menu item50 EN Select the repeat modeAccess the repeat mode Select the start point Select the repeat mode Select the chapterChapter Search Select the end pointSelect the time 52 ENTime Search Reactivate the Playback Control PBC FunctionSelect the menu item Programme PlaybackRandom Playback Select the tracks in the desired orderSubtitle Selection Access the menu54 EN Select the subtitle languageSelect the view angle When using the Angle buttonAngle Selection Press AngleAudio Language Selection When using the A.MONITOR button56 EN Select the audio languageSelect the audio channel When using the Audio buttonAudio Channel Selection For SvcdParental Lock 58 ENTo change the settings To temporarily release the Parental LockCountry/Area Code List for Parental Lock 60 ENPage MP3 control display What is MP3?62 EN Current trackSelect the group Using the MP3 control displayMP3 Playback To skip groups/tracks during playback 64 ENTrack/group selection To start playback by specifying the track numberWhat is JPEG? Jpeg control display66 EN Using the Jpeg control displayJpeg Playback Press rt to select the desired file, then press OKPress number keys 0-10, +10 to enter the file number File/group selectionTo start slide-show playback by specifying the file number To return to the Jpeg control displayEdit From a Camcorder 68 ENAdvantages of S-VHS video recorders Set the input mode of recording deckAnother Video Recorder Start the source playerFrom DVD to S-VHS Dubbing70 EN Prepare the audio device for dubbing Digital Audio DubbingPlace a disc and load a MD For the digital audio device72 EN Operate the TV TV Multi-Brand Remote ControlSet the TV brand code Outdoor unit Aerial Satellite cable Video output Audio/video input connectorsOutput connectors Make connections For each mode setting, see pages 77 to Mode SetAccess the Function Set screen 76 ENModes Ntscpal To playback a Ntsc tape on PAL TV Programme while timer-recording in SP mode78 EN For ExampleVHS indicator lights up on the front display panel Indicator lights up on the front display panelS-VHS recording mode is selected Mode settingLanguage Picture Audio Others Back to the beginning For each mode setting, see pages 81 to80 EN Press rt to move 0 to RESUME, then press OKPicture Settings Audio SettingsOthers Settings 82 ENAuto Channel Set Access the Auto Channel Set screenTuner Set Stations your unit located 84 ENPerform Auto Channel Set Appear on a channel list screenManual Channel Set Swap Channel Position 86 ENDelete a Channel Set the date and time Access the Clock Set screenClock Set Start the clock operationVHS deck only Off-Air Recording Information on Multi-System Compatibility88 EN Recording circuit Tape-To-Tape EditingRecorded tape Playback equipment On the unit On the remote control90 EN DVD indicator lights up Press DVD so that the DVD indicator92 EN Timer recording Recorded in its entirety. Next time make Timer recording won’t workRe-perform the clock and/or timer Timer mode is disengaged94 EN Front display panelPlayback 96 EN Repeat Playback About Discs Express Timer Programming File/group selectionMode Set S-VHS deck Chapter Search98 EN Memo HR-XVS20AA