JVC HR-XVS20AA Scan Mode Set, Access the DVD Set Up menu screen, How to change the Scan mode

EN 19

Scan Mode Set

C Access the DVD Set Up menu screen.

(DVD deck)

This unit supports the progressive scan system (eg. 480p*) as well as the conventional interlaced scan system (eg. 480i*).

APress SET UP MENU.

BPress w e to select “ PICTURE”.

PICTURE
MONITOR TYPE	4:3LB
PROGRESSIVE MODE	AUTO
SCREEN SAVER	ON
MP3 / JPEG	MP3

SELECT	USE	TO SELECT, USE OK TO CONFIRM.
OK	TO EXIT, PRESS [SET UP MENU].

If your TV equipped with component video connectors supports the progressive video input, you can enjoy a high quality picture by setting the progressive scan mode to active.

●Refer also to the instruction manuals supplied with your TV.

●If your TV equipped with component video connectors does

not support the progressive video input, do not change the scan mode to the “PROGRESSIVE” or “FILM”.

* 480p and 480i indicate the number of scanning lines and

scanning format of an image signal.

• 480p indicates 480 scanning lines with progressive format.

• 480i indicates 480 scanning lines with interlaced format.

D Select the mode.

Press rt to move 0 to

“PROGRESSIVE MODE”, then press OK.

PICTURE
MONITOR TYPE	4:3LB
PROGRESSIVE MODE	AUTO
SCREEN SAVER	ON
MP3 / JPEG	MP3

SELECT	USE	TO SELECT, USE OK TO CONFIRM.
OK	TO EXIT, PRESS [SET UP MENU].

You can select the progressive mode according to the picture type (film or video source). This takes effect only when Progressive mode is selected as the scanning mode. (
“ATTENTION” below)

ATTENTION

How to change the Scan mode

Press and hold DVD PICTURE for more than 3 seconds, to change the scan mode between Progressive and Interlace mode.* When DVD colour system is set to “PAL” (
pg. 18), you cannot select the progressive mode.

*The Scan Mode indicator lights up as described below. Green: in the Interlace mode

Red: in the Progressive mode

●Turn on the TV and select the video channel (or AV mode).

●Slide the TV/S-VHS/DVDswitch to the right.

A Turn on the unit.

Press 1.

B Select the DVD deck.

On the unit

Press S-VHS/DVDrepeatedly so that the DVD indicator lights up.

On the remote control

Press DVD so that the DVD indicator lights up.

E Select the mode setting.

Press rt to select the desired setting.

F Return to the normal screen.

Press SET UP MENU.

* The default setting is bold in the table below.

8PROGRESSIVE MODE

VIDEO: Suitable for playing back a video source disc.

FILM: Suitable for playing back a film or progressive source disc.

AUTO: Used to play a disc containing both video and film source materials. This unit recognizes the picture type (film or video source) of the current disc according to the disc information.

●If the playback picture is unclear or noisy, or the oblique lines of the picture are rough, try to change to other modes.