JVC LPT0762-001B, HR-XVS20AA manual 96 EN

Page 96

96 EN

SPECIFICATIONS

GENERAL

Power requirement : AC 110 V – 240 Vd, 50 Hz/60 Hz Power consumption

Power on	: 28 W
Power off	: 5.0 W
Temperature
Operating	: 5°C to 40°C
Storage	: –20°C to 60°C
Operating position	: Horizontal only
Dimensions (WxHxD)
	: 435 mm x 98 mm x 357 mm
Weight	: 4.8 kg
Format	: S-VHS/VHS standard
Maximum recording time
(SP)	: 240 min. with E-240 video cassette
	(PAL/MESECAM)
	: 160 min. with T-160 video cassette
	(NTSC)
(LP)	: 480 min. with E-240 video cassette
	(PAL/MESECAM)
(EP)	: 480 min. with T-160 video cassette
	(NTSC)

VIDEO/AUDIO (S-VHS deck)

Signal system	: PAL-type colour signal and CCIR
	monochrome signal, 625 lines
	50 fields
	NTSC colour and EIA monochrome
	signal, 525 lines/60 fields
Recording system	: DA4 (Double Azimuth) head helical

scan system

Signal-to-noise ratio: 45 dB Horizontal resolution

:250 lines (PAL/MESECAM)

220 lines (NTSC)

Frequency range	: 70	Hz to 10,000	Hz (Normal audio)
	20	Hz to 20,000	Hz (Hi-Fi audio)
Input/Output	: RCA connectors:
	IN x 2, OUT x 1

S-Video connector:

IN x 2, OUT x 1

VIDEO/AUDIO (DVD deck)

Signal system	: PAL
Applicable disc	: DVD (12 cm, 8 cm)
	CD (12 cm, 8 cm)
Audio characteristics
DVD	: 4 Hz – 22 KHz
Frequency response
CD	: 4 Hz – 20 KHz
S/N Ratio	: 90 dB
Harmonic distortion
	: 0.1 %
Wow and flutter	: Below Measurable Level
Dynamic range	: 90 dB
Output
Component-Y	: (RCA) 1.0 Vp-p/75 ohm
Component-PB/PR
	: (RCA) 0.7 Vp-p/75 ohm
Audio	: (RCA) 2 Vrms, 1 Kohm
Digital Audio	: 0.5 Vp-p/75 ohm
Pickup
CD
Wavelength	: 775 – 805 nm
Maximum output power
DVD	: 0.5 mW
DVD
Wavelength	: 640 – 660 nm

Maximum output power : 1.0 mW

TUNER/TIMER (S-VHS deck)

TV channel storage capacity

	: 99 positions (+AUX position)
Tuning system	: Frequency synthesized tuner
Channel coverage
VHF	: (low) 42 MHz – 175 MHz
	(high) 175 MHz – 470 MHz
UHF	: 470 MHz – 870 MHz
Aerial output	: UHF channels
	(Adjustable E28 – E60)

Memory backup time

: Approx. 10 min.

ACCESSORIES

Provided accessories

:RF cable, S-Video cable, Infrared remote control unit, “R6” battery x 2

Specifications shown are for SP mode unless otherwise specified.

E.& O.E. Design and specifications subject to change without notice.

Image 96

Contents HR-XVS20AA Safety Precautions Use only discs marked with the followingDo not place the unit Do not block the unit’s ventilation openings or holesTo mobile phone users On placing the unitSafety Precautions Remote Control FunctionsConnecting To a Satellite Receiver Mode Set S-VHS deck Mode Set DVD deck Tuner Set Clock SetAbout Discs Playable DiscsRegion Number Unplayable DiscsDVD Video Marks File Structure of DiscsMarks related to video Audio CD/Video CDPlacing a Disc Care and Handling of DiscsOpen the disc tray Place the discFront View Rear View 10 EN ON-SCREEN Display S-VHS deckOn the tape Remote Control How To UseCheck the contents 12 ENSituate the unit Connect the unit to TV8To connect to a TV with S-VIDEO/AUDIO in connectors Plug the end of the mains power cord into a mains outletVideo Connection 8To connect to a TV with Component Video in connectors Back of TV Audio in connectorsComponent Video Connection DVD deck onlyAccess the Video Channel Set mode Exit the Video Channel Set modeVideo Channel Set Set the video channelAuto Set Up 16 ENSelect the TV system Start Auto Channel SetPress OK or e Monitor Set 18 ENDVD deck Scan Mode Set Access the DVD Set Up menu screenHow to change the Scan mode Press rt to move 0 to Progressive MODE, then press OKLanguage 20 ENPress rt to move 0 to on Screen LANGUAGE, then press OK Press w e to select LanguageSee Language Code List pg Press rt to move 0 to Menu LANGUAGE, then press OKLanguage Code List 22 ENBasic Playback 24 EN Slow MotionHigh-Speed Turbo Search Pause during playbackIndex Search Skip SearchActivate Index Search To resume normal playback during a Skip Search, press26 EN Next Function MemoryRepeat Playback Manual TrackingChoose a programme Set the tape speedStart recording Pause/Resume recordingInstant Timer Recording ITR Engage the ITR mode28 EN Set the recording durationReset the counter Tape Remaining TimeReceiving Stereo and Bilingual Programmes Set the counter display30 EN PlaybackRecording Access the Main Menu screen Access the Initial Set screenGuide Program Number Set Guide Program NumberAccess the G-CODE/SHOWVIEWscreen Before performing the G-CODE/SHOWVIEW Timer ProgrammingProgramming 32 ENAccess the G-CODEProgram screen Engage the unit’s timer modeSatellite Receiver Users Guide Program Number SetExpress Timer Programming 34 ENTo Timer-Record Weekly Or Daily Serials Enter the channel positionPress PR + Disengage the timer mode Access the Programme Check screenPress # TIMER, then press Cancel or change a programme Return to the timer modePress # Timer When programmes overlap each other Cancel or change programme setting38 EN Confirm the overlapping programmesRecording mode IndicatorProgramme Recording Set the tape speed40 EN Load the discPause playback Place the disc in the disc trayAccess the PBC menu Stop modePlayback Control PBC Function During playback Press TOP MenuAccess the DVD menu 42 ENDVD menu Press TOP Menu or MenuSkip the item Playback High-Speed SearchResume Function Access the digest screen 44 ENDigest For DVD VideoStrobe Playback ZoomingPress Zoom during playback or while paused Press rt w e to move the zoomed-in sceneAccess the selection menu 46 EN3D Phonic Select the effect levelVFP function Adjusting the picture quality Contents of the on-screen bar during playback 48 ENPress Display twice whenever a disc is loaded Video CDAccess the on-screen bar Change the time informationSelect the option Select menu itemSelect the repeat mode Access the repeat mode50 EN Select the repeat mode Select the chapter Chapter SearchSelect the start point Select the end point52 EN Time SearchSelect the time Reactivate the Playback Control PBC FunctionProgramme Playback Random PlaybackSelect the menu item Select the tracks in the desired orderAccess the menu 54 ENSubtitle Selection Select the subtitle languageWhen using the Angle button Angle SelectionSelect the view angle Press AngleWhen using the A.MONITOR button 56 ENAudio Language Selection Select the audio languageWhen using the Audio button Audio Channel SelectionSelect the audio channel For SvcdParental Lock 58 ENTo change the settings To temporarily release the Parental LockCountry/Area Code List for Parental Lock 60 ENPage What is MP3? 62 ENMP3 control display Current trackUsing the MP3 control display MP3 PlaybackSelect the group 64 EN Track/group selectionTo skip groups/tracks during playback To start playback by specifying the track numberWhat is JPEG? Jpeg control displayUsing the Jpeg control display Jpeg Playback66 EN Press rt to select the desired file, then press OKFile/group selection To start slide-show playback by specifying the file numberPress number keys 0-10, +10 to enter the file number To return to the Jpeg control displayEdit From a Camcorder 68 ENSet the input mode of recording deck Another Video RecorderAdvantages of S-VHS video recorders Start the source playerDubbing 70 ENFrom DVD to S-VHS Digital Audio Dubbing Place a disc and load a MDPrepare the audio device for dubbing For the digital audio device72 EN TV Multi-Brand Remote Control Set the TV brand codeOperate the TV Audio/video input connectors Output connectorsOutdoor unit Aerial Satellite cable Video output Make connections Mode Set Access the Function Set screenFor each mode setting, see pages 77 to 76 ENModes Programme while timer-recording in SP mode 78 ENNtscpal To playback a Ntsc tape on PAL TV For ExampleIndicator lights up on the front display panel S-VHS recording mode is selectedVHS indicator lights up on the front display panel Mode settingFor each mode setting, see pages 81 to 80 ENLanguage Picture Audio Others Back to the beginning Press rt to move 0 to RESUME, then press OKPicture Settings Audio SettingsOthers Settings 82 ENAccess the Auto Channel Set screen Tuner SetAuto Channel Set 84 EN Perform Auto Channel SetStations your unit located Appear on a channel list screenManual Channel Set 86 EN Delete a ChannelSwap Channel Position Access the Clock Set screen Clock SetSet the date and time Start the clock operationInformation on Multi-System Compatibility 88 ENVHS deck only Off-Air Recording Tape-To-Tape Editing Recorded tape Playback equipmentRecording circuit On the remote control 90 ENOn the unit DVD indicator lights up Press DVD so that the DVD indicator92 EN Timer recording won’t work Re-perform the clock and/or timerTimer recording Recorded in its entirety. Next time make Timer mode is disengaged94 EN Front display panelPlayback 96 EN Express Timer Programming File/group selection Mode Set S-VHS deckRepeat Playback About Discs Chapter Search98 EN Memo HR-XVS20AA