JVC HR-XVS20AA, LPT0762-001B manual Picture Settings, Audio Settings

Page 81

EN 81

Picture Settings

* The default setting is bold in the table below.

8 SCREEN SAVER	The TV screen may be burned out if a static picture is displayed for a
ON	long time. When this function is set to “ON”, the unit automatically
OFF	activates the screen saver function if a static picture, such as an on-
	screen display or menu is displayed for over 5 minutes.

	NOTE:
	This function is not available for Audio CDs and MP3 discs.

8 MP3/JPEG	You can select files to play, when both MP3 files and JPEG files are
MP3	recorded on a disc.
JPEG	MP3:	Select this to play back MP3 files.
	JPEG:	Select this to play back JPEG files.

Audio Settings

* The default setting is bold in the table below.

8 DIGITAL AUDIO OUTPUT	Set to the appropriate mode according to the type of the device connected to
PCM ONLY	DIGITAL AUDIO OUT connector on the rear of unit.
DOLBY DIGITAL/PCM	It is not necessary to set this mode when you connect no device to DIGITAL
STREAM/PCM	AUDIO OUTconnector.
	PCM ONLY:
	Select this when you connect the unit’s DIGITAL AUDIO OUT
	connector to the linear PCM digital input connector of other audio
	device.
	DOLBY DIGITAL/PCM:
	Select this when you connect the unit’s DIGITAL AUDIO OUT
	connector to the digital input connector of a Dolby Digital decoder
	or an amplifier with a built-in Dolby Digital decoder.
	STREAM/PCM:
	Select this when you connect the unit’s DIGITAL AUDIO OUT
	connector to the digital input connector of an amplifier with a built-
	in DTS, Dolby Digital, or MPEG multichannel decoder.

8 ANALOG DOWN MIX	Set to the appropriate mode according to your audio system when you play
DOLBY SURROUND	back a DVD VIDEO disc recorded with surround multichannel audio. This
STEREO	setting affects only the analogue audio output signal from the AUDIO OUT
	connectors (DVD) when playing back a DVD VIDEO disc recorded with
	surround multichannel audio.
	DOLBY SURROUND:
		Select this when you enjoy multichannel surround audio by
		connecting the unit’s analogue AUDIO OUT connector (DVD)
	STEREO:	to a surround decoder or an internal amplifier.
		Select this when you enjoy conventional 2-channel stereo
		audio by connecting the unit’s analogue AUDIO OUT
		connectors (DVD) to a stereo amplifier/receiver or TV, or when
		you dub audio of a DVD VIDEO disc recorded with surround
		audio to your MD, cassette, etc.
	NOTE:
	The “ANALOG DOWN MIX” function does not work when the 3D Phonic function is
	activated. ( pg. 46)

Image 81

Contents HR-XVS20AA Use only discs marked with the following Safety PrecautionsDo not block the unit’s ventilation openings or holes Do not place the unitTo mobile phone users On placing the unitRemote Control Functions Safety PrecautionsConnecting To a Satellite Receiver Mode Set S-VHS deck Mode Set DVD deck Tuner Set Clock SetPlayable Discs About DiscsRegion Number Unplayable DiscsFile Structure of Discs DVD Video MarksMarks related to video Audio CD/Video CDCare and Handling of Discs Placing a DiscOpen the disc tray Place the discFront View Rear View 10 EN ON-SCREEN Display S-VHS deckOn the tape How To Use Remote Control12 EN Check the contentsSituate the unit Connect the unit to TV8To connect to a TV with S-VIDEO/AUDIO in connectors Plug the end of the mains power cord into a mains outletVideo Connection Back of TV Audio in connectors 8To connect to a TV with Component Video in connectorsComponent Video Connection DVD deck onlyExit the Video Channel Set mode Access the Video Channel Set modeVideo Channel Set Set the video channel16 EN Auto Set UpSelect the TV system Start Auto Channel SetPress OK or e Monitor Set 18 ENDVD deck Access the DVD Set Up menu screen Scan Mode SetHow to change the Scan mode Press rt to move 0 to Progressive MODE, then press OK20 EN LanguagePress rt to move 0 to on Screen LANGUAGE, then press OK Press w e to select LanguagePress rt to move 0 to Menu LANGUAGE, then press OK See Language Code List pg22 EN Language Code ListBasic Playback Slow Motion 24 ENHigh-Speed Turbo Search Pause during playbackSkip Search Index SearchActivate Index Search To resume normal playback during a Skip Search, pressNext Function Memory 26 ENRepeat Playback Manual TrackingSet the tape speed Choose a programmeStart recording Pause/Resume recordingEngage the ITR mode Instant Timer Recording ITR28 EN Set the recording durationTape Remaining Time Reset the counterReceiving Stereo and Bilingual Programmes Set the counter display30 EN PlaybackRecording Access the Initial Set screen Access the Main Menu screenGuide Program Number Set Guide Program NumberBefore performing the G-CODE/SHOWVIEW Timer Programming Access the G-CODE/SHOWVIEWscreenProgramming 32 ENEngage the unit’s timer mode Access the G-CODEProgram screenSatellite Receiver Users Guide Program Number Set34 EN Express Timer ProgrammingTo Timer-Record Weekly Or Daily Serials Enter the channel positionPress PR + Disengage the timer mode Access the Programme Check screenPress # TIMER, then press Cancel or change a programme Return to the timer modePress # Timer Cancel or change programme setting When programmes overlap each other38 EN Confirm the overlapping programmesIndicator Recording modeProgramme Recording Set the tape speedLoad the disc 40 ENPause playback Place the disc in the disc trayStop mode Access the PBC menuPlayback Control PBC Function During playback Press TOP Menu42 EN Access the DVD menuDVD menu Press TOP Menu or MenuSkip the item Playback High-Speed SearchResume Function 44 EN Access the digest screenDigest For DVD VideoZooming Strobe PlaybackPress Zoom during playback or while paused Press rt w e to move the zoomed-in scene46 EN Access the selection menu3D Phonic Select the effect levelVFP function Adjusting the picture quality 48 EN Contents of the on-screen bar during playbackPress Display twice whenever a disc is loaded Video CDChange the time information Access the on-screen barSelect the option Select menu itemSelect the repeat mode Access the repeat mode50 EN Chapter Search Select the repeat mode Select the chapterSelect the start point Select the end pointTime Search 52 ENSelect the time Reactivate the Playback Control PBC FunctionRandom Playback Programme PlaybackSelect the menu item Select the tracks in the desired order54 EN Access the menuSubtitle Selection Select the subtitle languageAngle Selection When using the Angle buttonSelect the view angle Press Angle56 EN When using the A.MONITOR buttonAudio Language Selection Select the audio languageAudio Channel Selection When using the Audio buttonSelect the audio channel For Svcd58 EN Parental LockTo temporarily release the Parental Lock To change the settings60 EN Country/Area Code List for Parental LockPage 62 EN What is MP3?MP3 control display Current trackUsing the MP3 control display MP3 PlaybackSelect the group Track/group selection 64 ENTo skip groups/tracks during playback To start playback by specifying the track numberJpeg control display What is JPEG?Jpeg Playback Using the Jpeg control display66 EN Press rt to select the desired file, then press OKTo start slide-show playback by specifying the file number File/group selectionPress number keys 0-10, +10 to enter the file number To return to the Jpeg control display68 EN Edit From a CamcorderAnother Video Recorder Set the input mode of recording deckAdvantages of S-VHS video recorders Start the source playerDubbing 70 ENFrom DVD to S-VHS Place a disc and load a MD Digital Audio DubbingPrepare the audio device for dubbing For the digital audio device72 EN TV Multi-Brand Remote Control Set the TV brand codeOperate the TV Audio/video input connectors Output connectorsOutdoor unit Aerial Satellite cable Video output Make connections Access the Function Set screen Mode SetFor each mode setting, see pages 77 to 76 ENModes 78 EN Programme while timer-recording in SP modeNtscpal To playback a Ntsc tape on PAL TV For ExampleS-VHS recording mode is selected Indicator lights up on the front display panelVHS indicator lights up on the front display panel Mode setting80 EN For each mode setting, see pages 81 toLanguage Picture Audio Others Back to the beginning Press rt to move 0 to RESUME, then press OKAudio Settings Picture Settings82 EN Others SettingsAccess the Auto Channel Set screen Tuner SetAuto Channel Set Perform Auto Channel Set 84 ENStations your unit located Appear on a channel list screenManual Channel Set 86 EN Delete a ChannelSwap Channel Position Clock Set Access the Clock Set screenSet the date and time Start the clock operationInformation on Multi-System Compatibility 88 ENVHS deck only Off-Air Recording Tape-To-Tape Editing Recorded tape Playback equipmentRecording circuit On the remote control 90 ENOn the unit Press DVD so that the DVD indicator DVD indicator lights up92 EN Re-perform the clock and/or timer Timer recording won’t workTimer recording Recorded in its entirety. Next time make Timer mode is disengagedFront display panel 94 ENPlayback 96 EN Mode Set S-VHS deck Express Timer Programming File/group selectionRepeat Playback About Discs Chapter Search98 EN Memo HR-XVS20AA