JVC LPT0762-001B, HR-XVS20AA manual Edit From a Camcorder, 68 EN

68 EN EDITING (S-VHS DECK)

Edit From A

Camcorder

AIf the camcorder has no S-VIDEO output connector:

Recorder

AUDIO input	To PAUSE
	connector
VIDEO
input
Audio cable (not provided)
Video cable (not provided)	Mini-plug cable
	(not provided)
VIDEO OUT	(JVC camcorder
	only)
AUDIO OUT
Camcorder

Player EDIT

B If the camcorder has an S-VIDEO output connector:

S-VIDEO input

Recorder

You can use a camcorder as the source player and your unit as the recording deck.

Slide the TV/S-VHS/DVDswitch to the right.

A Make connections.

AIf the camcorder has no S-VIDEO output connector:

—connect the camcorder’s AUDIO OUT and VIDEO OUT connectors to the unit’s front panel AUDIO and VIDEO input connectors.

BIf the camcorder has an S-VIDEO output connector:

—connect the camcorder’s AUDIO OUT and

S-VIDEO OUT connectors to the unit’s front panel AUDIO and S-VIDEO input connectors.

●When using a monaural camcorder, connect its AUDIO OUT connector to the AUDIO L input connector on your unit.

●When a Master Edit Control-equipped JVC camcorder is used, the camcorder is capable of controlling the unit. Refer to the camcorder’s instruction manual for operating procedure.

B Select the S-VHS deck.

On the unit

Press S-VHS/DVDrepeatedly so that the S-VHS indicator lights up.

On the remote control

Press S-VHSso that the S-VHS indicator lights up.

C Set the unit’s input mode.

Press AUX (number key “0”) and/or PR to select “F-1” for the AUDIO and VIDEO input connectors, or “S-1” for the AUDIO and S-VIDEO input connectors, depending on the connectors being used.

D Set the edit mode.

See “PICTURE CONTROL” on page 77.

E Start the camcorder.

Engage the Play mode of the camcorder.

AUDIO input Audio cable (not provided)

S-Video cable (not provided)

S-VIDEO OUT

AUDIO OUT

Camcorder

To PAUSE connector

Mini-plug cable (not provided) (JVC camcorder only)

F Start the unit.

Engage the Record mode of the unit.

NOTES:

●All necessary cables can be obtained from your dealer.

●When you select “EDIT” to dub tapes in step D, be sure to select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”) after you finish dubbing the tapes.

IMPORTANT

● To edit, both the player and the recorder must be of the same

colour system. Select the appropriate colour system. ( pg. 77,

78)

● PAL, SECAM and NTSC camcorders can be used as a player for

editing.

● For more information on multi-system compatibility, refer to

Player

EDIT

“Information on Multi-System Compatibility (S-VHS deck only)”

( pg. 88)