JVC HR-XVS20AA, LPT0762-001B manual Manual Channel Set

EN 85

E Select the band.

Press rt to move the highlight bar (pointer) to the desired band, then press OK to initiate Manual Channel Set.

	BAND SELECT		MANUAL CH SET
		VHF L	PLEASE WAIT
		VHF H
		UHF	VHF L 300MHZ
[ / ]
[MENU] : EXIT			[MENU] : EXIT

F Set the station.

The screen to the right appears when a station is detected.

If you do not want to store the

detected station...

Press rtto move the highlight bar (pointer) to “CONTINUE”, then press OK or e. Channel search will resume.

STORE

CONTINUE

[ /] [MENU] : EXIT

Manual Channel Set

Store channels that were not stored during Auto Set Up ( pg. 16) or Auto Channel Set ( pg. 83).

A Access the Main Menu screen.

Press SET UP MENU.

B Access the Tuner Set screen.

Press rt to move the highlight bar (pointer) to “TUNER SET”, then press OK or e.

C Access the channel list.

Press rt to move the highlight bar (pointer) to ”CH EDIT”, then press OK or e.

D Select the channel position.

Press rt to move the highlight bar (pointer) to an open channel position, then press OK or e.

If you want to store the detected station...

Press rt to move the highlight bar (pointer) to “STORE”, then press OK or e. The Channel List appears again.

●The blueback screen and the TV picture currently being broadcast appear alternately for 8 seconds each.

●If you want to store another channel, repeat steps 4 – 6.

●When channel search completes for that band, the Band Select screen appears again. To set channels for other bands, select another band and start Manual Channel Set again ( steps 5 and 6).

G Return to the normal screen.

Press SET UP MENU.

●To change positions, see “Swap Channel Position” ( pg. 86).