JVC LPT0762-001B, HR-XVS20AA manual Dubbing, 70 EN, From DVD to S-VHS

70 EN EDITING (S-VHS DECK) (cont.)

Dubbing

(from DVD to S-VHS)

●Turn on the TV and select the video channel (or AV mode).

●Slide the TV/S-VHS/DVDswitch to the right.

You can dub selected scenes from the DVD disc to a cassette, starting and stopping wherever you wish.

However, it is not possible to dub the copy-protected disc.

A Load a cassette and place a disc.

For the S-VHS deck

Insert a cassette with the record safety tab intact.

For the DVD deck

APress x on the DVD deck to open the disc tray.

BPlace the disc in the disc tray.

CPress x on the DVD deck to close the disc tray.

B Prepare the S-VHS deck for dubbing.

APress S-VHS.

BPress p to select recording speed.

CSearch for the point where you want to start dubbing by pressing 4, 5 or 3 then press 8.

C Prepare the DVD deck for dubbing.

APress DVD.

BSearch for the point where you want to start dubbing by pressing 4, 5 or 3.

CPress 9 to pause playback a little before the start point.

DPress and hold 7, then press 9.

●“dub” blinks on the front display panel.

D Start dubbing.

Press 4 to start playback.

E End dubbing.

Press 8.

NOTES:

●Set “ON SCREEN GUIDE” to “OFF” ( pg. 82) if you do not want to record the on-screen display for DVD discs during dubbing.

●There may be a discrepancy of several seconds between where you intend editing to start, and where it actually starts.

●The superimposed indication during the operation or dubbing is not recorded.