JVC LPT0762-001B Programming, 32 EN, Access the G-CODE/SHOWVIEWscreen, Enter the G-CODEnumber

32 EN OPERATIONS ON S-VHS DECK (cont.)

G-CODE™/

SHOWVIEW™ Timer

Programming

With the G-CODE/SHOWVIEWsystem, timer programming is greatly simplified because each TV programme has a corresponding code number which your unit is able to recognize.

INFORMATION

G-CODEand SHOWVIEW are different trademarks used to represent the same easy recording feature, but only the term G-CODEsystem will be used in the instructions. If you use the SHOWVIEW system, follow the same instructions listed for the G-CODEsystem.

Before performing the G-CODE™/SHOWVIEW™ Timer Programming:

●Be sure to read “G-CODE™/SHOWVIEW™ System Setup” ( pg. 31).

●Make sure that the unit’s built-in clock is set properly.

●Insert a cassette with the safety tab in place. The unit will come on automatically.

●Turn on the TV and select the video channel (or AV mode).

●Slide the TV/S-VHS/DVDswitch to the right.

A Select the S-VHS deck.

On the unit

Press S-VHS/DVDrepeatedly so that the S-VHS indicator lights up.

On the remote control

Press S-VHSso that the S-VHS indicator lights up.

B Access the G-CODE/SHOWVIEWscreen.

Press PROG.

G-CODE/SHOWVIEW NO.

[0 – 9]

[+/–] : EXPRESS PROGRAMING

[PROG] : EXIT

C Enter the G-CODEnumber.

Press the number keys to enter the G-CODEnumber of a programme you wish to record.

●If you make a mistake, press & and input the correct number.

G-CODE/SHOWVIEW NO.

1 2 3 4 5 6 7 8

[0 – 9] [] : DELETE [PROG] : EXIT