JVC HR-XVS20AA manual Another recorder, Your unit can record in S-VHS Super VHS, S-VHS ET or VHS

	EN 79
	* The default setting is bold in the table below.
8 VIDEO STABILIZER	When this function is set to “ON”, you can automatically correct vertical
ON	vibration in the picture when playing back unstable recordings made on
OFF	another recorder.
	NOTES:
	● When you finish viewing a tape, be sure to set this function to “OFF”.
	● Regardless of the setting, this function has no effect during recording and during special
	effects playback.
	● The on-screen display may jitter vertically when this function is set to “ON”.
	● To watch recordings with close-caption, set this function to “OFF”.
8 S-VHS	Your unit can record in S-VHS (Super VHS), S-VHS ET or VHS.
ON	●To record in S-VHS:
OFF
	Set “S-VHS” to “ON”. Then, insert a cassette marked “S-VHS”. The S-VHS
	indicator lights up on the front display panel.
	The S-VHS recording mode is selected.
	●To record in S-VHS ET on a VHS cassette:
	Set “S-VHS ET” to “ON”. ( pg. 77) Then, insert a cassette marked “VHS”. The
	S-VHS indicator lights up on the front display panel.
	●To record in VHS:
	Insert a cassette marked “VHS”.
	Set “S-VHS ET” to “OFF”. ( pg. 77)
	The VHS recording mode is automatically selected regardless of the “S-VHS”
	mode setting.
	●To record in VHS on an S-VHS cassette:
	Insert a cassette marked “S-VHS”. The S-VHS indicator lights up on the front
	display panel. Then, set “S-VHS” to “OFF”. The S-VHS indicator goes off.
	The VHS recording mode is selected.
	NOTE:
	When playing back a tape that has been recorded in S-VHS or S-VHS ET, the S-VHS
	indicator lights up on the front display panel regardless of the “S-VHS” mode setting.
8 AUTO POWER OFF	When this function is set to “3H”, the unit is turned off automatically if no
3H	operation is done within 3 hours. “AUTO POWER OFF IN 3 MIN” appears on
OFF	the screen 3 minutes before the unit is turned off.