Z Microsystems ZX Station manual Operation, Powering UP, Controls and Displays, Cd-Rom, Scsi ID

Page 13

Operation

POWERING UP

Switch the ZX Station on by pushing and releas- ing the power switch located on the right of the center front panel.

CONTROLS AND DISPLAYS

Peripheral options from left to right, top to bottom:

•Empty slot front cover.

•CD-ROM.

•Power light.

•Power switch. Press down and release for on.

On the right panel of the ZX Station, from left to right, top to bottom:

•3-1/2 inch floppy drive.

•Handle for TranzPak 6 removable memory drive.

•Power Light.

•Active Light.

•SCSI ID Set Switch

•Read-only light.

•SCSI ID.

•Removable memory drive security lock. Push drive all way in and rotate security lock clockwise to lock drive in place.

13

Document# 27-0007UM Issued 11/00 Rev. 1.0

Image 13

Contents ZX Station FCC Information RegulatoryContents Starting Point Shipment ContentsFIELD-READY Product DescriptionStarting Point Tools Required PrecautionsSlide Removal Install SlidesInstall the Slides in Cabinet Frame Install the ZX Station in Cabinet Frame Install ZX StationInstallation Test Securing ZX Station in Cabinet Frame Final AdjustmentsInstalling Cables Operation Powering UPControls and Displays CD-ROMTranzpak Front Panel Disk Module Handle Function SwitchFront Panel Functioning Installing Disk Module Powering UP the Hard Disk Setting the Scsi ID Function Switch Versions Function Switch Electrical DescriptionLocking the Disk Module and Hard Disk Operation Operating the Disk Module Powering Down the Hard DiskRemoving the Disk Module Carrying the Disk Module Installing Your OWN Hard Disk DriveOpening the ZX Station Internal AccessClosing the ZX Station Clean Front Panel MaintenanceFront Panel TroubleshootingTBD SpecificationsEMI Appendix WarrantyDept. at Z Microsystems 858 Handling Classified material Y2K Compliance Further Help SupportProviding Feedback Replacing PartsMicrosystems, Inc