Z Microsystems ZX Station manual Maintenance, Clean Front Panel

Page 25

Maintenance

CLEAN FRONT PANEL

WARNING: Be sure to turn off the power before performing any maintenance on the ZX Station

• Gently wipe the front panel of the ZX Station with a soft cloth.

• Remove finger marks and grease with a damp cloth and mild detergent. DO NOT use solvents or abrasives.

• Never use flammable cleaning material to clean the front panel of the ZX Station or other electrical apparatus.

25

Document# 27-0007UM Issued 11/00 Rev. 1.0

Image 25

Contents ZX Station FCC Information RegulatoryContents Starting Point Shipment ContentsFIELD-READY Product DescriptionStarting Point Tools Required PrecautionsSlide Removal Install SlidesInstall the Slides in Cabinet Frame Install the ZX Station in Cabinet Frame Install ZX StationInstallation Test Securing ZX Station in Cabinet Frame Final AdjustmentsInstalling Cables Operation Powering UPControls and Displays CD-ROMTranzpak Front Panel Disk Module Handle Function SwitchFront Panel Functioning Installing Disk Module Powering UP the Hard Disk Setting the Scsi ID Function Switch Versions Function Switch Electrical DescriptionLocking the Disk Module and Hard Disk Operation Operating the Disk Module Powering Down the Hard DiskRemoving the Disk Module Carrying the Disk Module Installing Your OWN Hard Disk DriveOpening the ZX Station Internal AccessClosing the ZX Station Clean Front Panel MaintenanceFront Panel TroubleshootingTBD SpecificationsEMI Appendix WarrantyDept. at Z Microsystems 858 Handling Classified material Y2K Compliance Further Help SupportProviding Feedback Replacing PartsMicrosystems, Inc