Z Microsystems ZX Station manual Function Switch, Disk Module Handle

Page 16

Operation

TRANZPAK 6

FUNCTION SWITCH

The function switch has multiple features and is used for a variety of tasks in operating a disk module and its internal disk drive.

DISK MODULE HANDLE

The handle serves several functions:

(1)it is an on/off power switch for the internal hard disk drive, (2) it is a mechanical lock, and (3) it disen- gages the module latch to allow removal of the disk module from the docking base.

Handle used in disk module insertion.

Handle

Handle used to carry disk module.

16

Document# 27-0007UM Issued 11/00 Rev. 1.0

Image 16

Contents ZX Station Regulatory FCC InformationContents Shipment Contents Starting PointProduct Description FIELD-READYStarting Point Precautions Tools RequiredInstall Slides Slide RemovalInstall the Slides in Cabinet Frame Install the ZX Station in Cabinet Frame Install ZX StationInstallation Test Final Adjustments Securing ZX Station in Cabinet FrameInstalling Cables Powering UP OperationControls and Displays CD-ROMTranzpak Front Panel Function Switch Disk Module HandleFront Panel Functioning Installing Disk Module Powering UP the Hard Disk Setting the Scsi ID Function Switch Versions Function Switch Electrical DescriptionLocking the Disk Module and Hard Disk Operation Operating the Disk Module Powering Down the Hard DiskRemoving the Disk Module Installing Your OWN Hard Disk Drive Carrying the Disk ModuleOpening the ZX Station Internal AccessClosing the ZX Station Maintenance Clean Front PanelTroubleshooting Front PanelTBD SpecificationsEMI Warranty AppendixDept. at Z Microsystems 858 Handling Classified material Y2K Compliance Support Further HelpReplacing Parts Providing FeedbackMicrosystems, Inc