Z Microsystems ZX Station manual Specifications, Tbd, Emi

Page 27

Specifications

The exact specifications may vary, depending on the combination of compo- nents ordered for the ZX Station.

Dimensions

7.00” H x 17.5” W x 19.0” D

Weight

24 lbs.

Power

90 - 132 vac or 180 - 264 VAC

 

(switchable) 250 watts max. 175 watts

 

typical

Operating temperature

10° C to 35° C (50 to 95° F)

Non-operating temperature

-20° C to +60° C (-4° F to 140° F)

Operating humidity

40% to 80% noncondensing

Non-operating humidity

30% to 90% noncondensing

Shock

TBD

Vibration

TBD

Electrical

UL 1950

EMI

FCC Class A

Mil-Spec

Additional extended range environ-

 

mental military specifications can be

 

met with optional enhancements.

Peripherals

 

Fixed Slot #1

Standard SCSI CD-ROM

Fixed Slot #2

Optional - choice of 5.25” Half-

 

Height SCSI tape/disk

Fixed Slot #3

Standard -- 1.44 MB 3.5” Floppy Disk

Removable Slot

Optional - choice of Removable

 

TranzPak disks/tapes

27

Document# 27-0007UM Issued 11/00 Rev. 1.0

Image 27
Contents ZX Station FCC Information RegulatoryContents Starting Point Shipment ContentsFIELD-READY Product DescriptionStarting Point Tools Required PrecautionsSlide Removal Install SlidesInstall the Slides in Cabinet Frame Install ZX Station Install the ZX Station in Cabinet FrameInstallation Test Securing ZX Station in Cabinet Frame Final AdjustmentsInstalling Cables CD-ROM Powering UPOperation Controls and DisplaysTranzpak Front Panel Disk Module Handle Function SwitchFront Panel Functioning Installing Disk Module Powering UP the Hard Disk Setting the Scsi ID Function Switch Electrical Description Function Switch VersionsLocking the Disk Module and Hard Disk Operation Powering Down the Hard Disk Operating the Disk ModuleRemoving the Disk Module Carrying the Disk Module Installing Your OWN Hard Disk DriveInternal Access Opening the ZX StationClosing the ZX Station Clean Front Panel MaintenanceFront Panel TroubleshootingSpecifications TBDEMI Appendix WarrantyDept. at Z Microsystems 858 Handling Classified material Y2K Compliance Further Help SupportProviding Feedback Replacing PartsMicrosystems, Inc