Z Microsystems ZX Station manual Front Panel

Page 15

Operation

TRANZPAK 6

FRONT PANEL

The front panel of the TranzPak 6 contains three LEDs, a SCSI ID indicator, a push-switch to set the SCSI ID and a function switch.

The top LED indicates power to the hard disk drive. The middle LED indicates an active state when the computer is accessing the TranzPak 6. The bottom LED indicates a read only state.

The SCSI ID Indicator shows a number, which is the setting for the disk module.

The SCSI ID Set Switch is a push-to- set switch that advances the SCSI ID Indicator by one number with each push.

The Function Switch has four positions.

15

Document# 27-0007UM Issued 11/00 Rev. 1.0

Image 15

Contents ZX Station FCC Information RegulatoryContents Starting Point Shipment ContentsFIELD-READY Product DescriptionStarting Point Tools Required PrecautionsSlide Removal Install SlidesInstall the Slides in Cabinet Frame Install ZX Station Install the ZX Station in Cabinet FrameInstallation Test Securing ZX Station in Cabinet Frame Final AdjustmentsInstalling Cables CD-ROM Powering UPOperation Controls and DisplaysTranzpak Front Panel Disk Module Handle Function SwitchFront Panel Functioning Installing Disk Module Powering UP the Hard Disk Setting the Scsi ID Function Switch Electrical Description Function Switch VersionsLocking the Disk Module and Hard Disk Operation Powering Down the Hard Disk Operating the Disk ModuleRemoving the Disk Module Carrying the Disk Module Installing Your OWN Hard Disk DriveInternal Access Opening the ZX StationClosing the ZX Station Clean Front Panel MaintenanceFront Panel TroubleshootingSpecifications TBDEMI Appendix WarrantyDept. at Z Microsystems 858 Handling Classified material Y2K Compliance Further Help SupportProviding Feedback Replacing PartsMicrosystems, Inc