Z Microsystems ZX Station manual Carrying the Disk Module, Installing Your OWN Hard Disk Drive

Page 23

Operation

CARRYING THE DISK MODULE

The handle can be used to carry the disk module. No special precau- tions are needed.

INSTALLING YOUR OWN HARD DISK DRIVE

NOTE: Refer to the TranzPak 6 User Manual for details about system operations.

Refer to the TranzPak 6 User Manual for detailed instructions on installing your own hard disk drive into the ZX Station.

Subjects covered include:

Open the Module

Remove the Shock Mounts

Install the Shock Mounts Onto Disk Drive

Install the SCSI ID Harness Onto Disk Drive

Install the DC Power Harness Onto Disk Drive

Install the SCSI Interface Harness Onto Disk Drive

Mount the Disk Drive in Disk Module

Reinstall SCSI ID Harness in Disk Module

Secure Harness Cables in Disk Module

Install Disk Module Cover

23

Document# 27-0007UM Issued 11/00 Rev. 1.0

Image 23
Contents ZX Station FCC Information RegulatoryContents Starting Point Shipment ContentsFIELD-READY Product DescriptionStarting Point Tools Required PrecautionsSlide Removal Install SlidesInstall the Slides in Cabinet Frame Installation Test Install ZX StationInstall the ZX Station in Cabinet Frame Securing ZX Station in Cabinet Frame Final AdjustmentsInstalling Cables CD-ROM Powering UPOperation Controls and DisplaysTranzpak Front Panel Disk Module Handle Function SwitchFront Panel Functioning Installing Disk Module Powering UP the Hard Disk Setting the Scsi ID Locking the Disk Module and Hard Disk Function Switch Electrical DescriptionFunction Switch Versions Operation Removing the Disk Module Powering Down the Hard DiskOperating the Disk Module Carrying the Disk Module Installing Your OWN Hard Disk DriveClosing the ZX Station Internal AccessOpening the ZX Station Clean Front Panel MaintenanceFront Panel TroubleshootingEMI SpecificationsTBD Appendix WarrantyDept. at Z Microsystems 858 Handling Classified material Y2K Compliance Further Help SupportProviding Feedback Replacing PartsMicrosystems, Inc