Z Microsystems ZX Station manual Troubleshooting, Front Panel

Page 26

Troubleshooting

FRONT PANEL

• Power light does not illuminate	•	Check that power cable is properly
		connected to 110 vac power
		supply.
	•	Check that front panel power
		switch is on
	•	Check that power switch on back of
		ZX Station next to power plug is on.

ZX STATION CONFIGURATION

Because of the many configurations that the ZX Station can have with various combinations of compo- nents, visit the Z Microsystems Website for the latest Troubleshoot- ing guidance.

www.zmicro.com

26

Document# 27-0007UM Issued 11/00 Rev. 1.0

Image 26

Contents ZX Station Regulatory FCC InformationContents Shipment Contents Starting PointProduct Description FIELD-READYStarting Point Precautions Tools RequiredInstall Slides Slide RemovalInstall the Slides in Cabinet Frame Installation Test Install ZX StationInstall the ZX Station in Cabinet Frame Final Adjustments Securing ZX Station in Cabinet FrameInstalling Cables Controls and Displays Powering UPOperation CD-ROMTranzpak Front Panel Function Switch Disk Module HandleFront Panel Functioning Installing Disk Module Powering UP the Hard Disk Setting the Scsi ID Locking the Disk Module and Hard Disk Function Switch Electrical DescriptionFunction Switch Versions Operation Removing the Disk Module Powering Down the Hard DiskOperating the Disk Module Installing Your OWN Hard Disk Drive Carrying the Disk ModuleClosing the ZX Station Internal AccessOpening the ZX Station Maintenance Clean Front PanelTroubleshooting Front PanelEMI SpecificationsTBD Warranty AppendixDept. at Z Microsystems 858 Handling Classified material Y2K Compliance Support Further HelpReplacing Parts Providing FeedbackMicrosystems, Inc