Z Microsystems ZX Station manual Starting Point

Page 6

Starting Point

1.4 Screws #10-32 x .75 Oval Hd Phil

2.4 Washer, Finishing, #10 SS

3.4 Washer # 10, Nylon, 82 Deg

4.8 Screws #10-32 x .375 Low Hd

5.8 Screws #10-32 x .75 Pan Hd SEM

6

Document# 27-0007UM Issued 11/00 Rev. 1.0

Image 6

Contents ZX Station Regulatory FCC InformationContents Shipment Contents Starting PointProduct Description FIELD-READYStarting Point Precautions Tools RequiredInstall Slides Slide RemovalInstall the Slides in Cabinet Frame Install ZX Station Install the ZX Station in Cabinet FrameInstallation Test Final Adjustments Securing ZX Station in Cabinet FrameInstalling Cables Controls and Displays Powering UPOperation CD-ROMTranzpak Front Panel Function Switch Disk Module HandleFront Panel Functioning Installing Disk Module Powering UP the Hard Disk Setting the Scsi ID Function Switch Electrical Description Function Switch VersionsLocking the Disk Module and Hard Disk Operation Powering Down the Hard Disk Operating the Disk ModuleRemoving the Disk Module Installing Your OWN Hard Disk Drive Carrying the Disk ModuleInternal Access Opening the ZX StationClosing the ZX Station Maintenance Clean Front PanelTroubleshooting Front PanelSpecifications TBDEMI Warranty AppendixDept. at Z Microsystems 858 Handling Classified material Y2K Compliance Support Further HelpReplacing Parts Providing FeedbackMicrosystems, Inc