Z Microsystems ZX Station manual Regulatory, FCC Information

Page 2
ZX STATION

Regulatory

FCC INFORMATION

1.Use the power and video cables supplied with this equipment to help prevent interference with radio and television reception. The use of cables and adapters may cause interference with electronic equipment in the vicinity of this unit.

2.This equipment has been tested and found to

comply with the limits for Class “A” digital devices, pursuant to certain limits imposed

by Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in when equipment is operated in commercial environments. This equipment generates, uses and can radiate radio frequency energy, and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

3.Operation of this equipment in a residential area is likely to cause interference in which case the user will be required to correct the interference at his own expense. Changes or modifications not expressly approved by Z Microsystems

could void user’s authority to operate the equipment

2

Document# 27-0007UM Issued 11/00 Rev. 1.0

Image 2
Contents ZX Station Regulatory FCC InformationContents Shipment Contents Starting PointProduct Description FIELD-READYStarting Point Precautions Tools RequiredInstall Slides Slide RemovalInstall the Slides in Cabinet Frame Installation Test Install ZX StationInstall the ZX Station in Cabinet Frame Final Adjustments Securing ZX Station in Cabinet FrameInstalling Cables Controls and Displays Powering UPOperation CD-ROMTranzpak Front Panel Function Switch Disk Module HandleFront Panel Functioning Installing Disk Module Powering UP the Hard Disk Setting the Scsi ID Locking the Disk Module and Hard Disk Function Switch Electrical DescriptionFunction Switch Versions Operation Removing the Disk Module Powering Down the Hard DiskOperating the Disk Module Installing Your OWN Hard Disk Drive Carrying the Disk ModuleClosing the ZX Station Internal AccessOpening the ZX Station Maintenance Clean Front PanelTroubleshooting Front PanelEMI SpecificationsTBD Warranty AppendixDept. at Z Microsystems 858 Handling Classified material Y2K Compliance Support Further HelpReplacing Parts Providing FeedbackMicrosystems, Inc