CONNECTIONS
Description - rear panel
AV1
2 | 1 | 3 | 4 | 5 | 6 |
1.DIGITAL OUT JACKS:
Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver. Use to connect to a Dolby Digital decoder or DTS decoder.
2.AUDIO OUT JACKS
Connect to the Audio input jacks of
3.VIDEO OUT JACKS
Use a video cable to connect one of the jacks to the Video input on your
4.COMPONENT VIDEO OUT JACKS
Use these jacks if you have a TV with Component Video in jacks. These jacks provide CR, CB and Y video. Along with S- Video, Component Video provides the best picture quality.
5.S-VIDEO OUT JACK
Use the
6.AV1 JACK
Connect to the
NOTES
•Be sure not to use both AV1 jack and component Video jacks for video output at the same time.
•When changing the VIDEO OUT setting (SCART or COMPONENT), use a VIDEO jack or an
Manufactured under license from Dolby Laboratories. “Dolby” and the
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
– 12 – | EN |