CONNECTIONS
The following show examples of connections commonly used to connect the DVD player to a TV and other components.
Notes
¡Be sure to switch off the power to all components in the system before connecting another component.
¡Refer to the Instruction Manuals for your TV, stereo system and any other components to be connected to the DVD player.
Connection to an audio system
Method 1 | Method 2 |
English
AUDIO
DVD
| Dolby Digital decoder, |
Stereo system | DTS decoder or |
| MPEG decoder |
Audio Input Jacks | Digital Audio Input |
| |
| Jacks |
Analogue Audio Out
Digital Audio Out
•Method 1 DVD Player + Stereo system
•Method 2 DVD Player + Dolby Digital decoder, DTS decoder or MPEG decoder
NOTES
•If Dolby Digital audio will be output, connect to a Dolby Digital decoder, and set Dolby Digital audio output to on in the setup mode. (See page 25)
•If DTS audio will be output, connect to a DTS decoder, and set DTS audio output to ON in the setup mode. (See page 25)
•If output MPEG audio, connect to a MPEG decoder, and set MPEG to ON for audio output in the setup mode. (See page 25)
•Unless connected to a Dolby Digital decoder, a DTS decoder or an MPEG decoder, set Dolby Digital, DTS and MPEG to off for audio output in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers. (See page 25)
•The audio source on a disc in the 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DAT deck.
•Set Dolby Digital, DTS and MPEG to OFF for audio output in the setup mode for method 1 only. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers. (Refer to page 25 to set ON for Dolby Digital, DTS and MPEG)
Optical cable (not supplied)
•The optical cable (not supplied) may be damaged if bent at sharp angles. Ensure cables are coiled in loops with a diame- ter of 15 cm or more when storing them.
•Use a cable which is 3m or shorter.
•Insert cable plugs firmly into the connectors when making connections.
•If a plug has minor scratches or is dirty, clean it with a soft cloth before inserting it into a connector.
– 13 – | EN |