Denon DVD-700 manual Troubleshooting Guide, Problem Solution

TROUBLESHOOTING GUIDE

If the DVD player does not perform properly when operated as instructed in these Operating Instructions, check the player, consulting the following checklist.

Problem	Solution
No power	–Check if the AC power cord is properly connected.
	–Unplug the cord once, and wait for 5-10 seconds.Then plug it in
	again
No sound or picture	–Check if the TV is switched on.
	–Check the video connection
	–Check the VIDEO/AUDIO cable connections to the TV
	(See Connecting to a TV)
	–DTS sound cannot be produced with an analogue connection.
Distorted picture	–Sometimes a small amount of picture distortion may appear.
	This is not a malfunction.
	–Connect the player directly to the TV.
Completely distorted picture or	–Connect the DVD player directly to the TV.
black/white picture with DVD	–Make sure the disc is compatible with the DVD player.
No sound or distorted sound	–Adjust the volume.
	–Check that the speakers are connected correctly.
No audio at digital output	–Check the digital connections.
	–Check if the audio format of the selected audio language matches
	your receiver’s capabilities.
Picture freezes momentarily	–Check the disc for fingerprints/scratches and
during playback	clean with a soft cloth wiping from centre to edge.
	–Clean the disc
Disc can’t be played	–Clean the disc
	–Ensure the disc label is facing up.
	–Check if the disc is defective by trying another disc.
	–Cancel the parental lock or change the control level.
	–Insert a correct disc that plays on this player.
No return to start-up screen when	–Reset the player by switching the player off, and then on again.
disc is removed
The player does not respond to	–Aim the remote control directly at the sensor on the front of the player.
the remote control	–Reduce the distance to the player.
	–Replace the batteries in the remote control.
	–Re-insert the batteries with their polarities (+/– signs) as indicated.
Buttons do not work or player stops	–To completely reset the player, unplug the AC
responding	cord from the AC outlet for 5-10 seconds.
Player does not respond to some	–Operations may not be permitted by the disc.
operating commands during playback	Refer to the instructions of the disc.
DVD player cannot read	–Use a commonly available cleaning CD/DVD to
CDs/DVDs	clean the lens before sending the DVD player for repair.
Angle does not switch	–The angle cannot be switched for DVDs which do not contain
	multiple angles. In some cases multiple angles are only recorded
	for specific scenes.
Playback does not start when the title is selected	–Check the “PARENTAL” setting.
The password for a rating level has been forgotten	–Enter the default password “4737”, and then your forgotten pass
	word will be cleared
No DTS audio at the analogue outputs	–Use a DIGITAL AUDIO OUT jack when outputting the DTS audio.

NOTES:

Some functions are not available in specific modes, but this is not a malfunction. Read the description in these Operating Instructions for details on correct operations.

•Playback from a desired track and random playback are not available during programme playback.

– 28 – EN