Dish Network Solo 111 manual Using Timers

4. Select the Edit List Name option to open the virtual keyboard.

Note: You cannot change the name of the All Chan or All Sub list.

5.Select a letter in the keypad area on the screen. Repeat to spell out the desired name. You can enter up to eight characters, including spaces. If needed, select the space option to insert a space in the name or the <back option to correct a letter.

Note: A list must have at least one character. Two lists cannot have the same name.

Note: At any time, you can select Clear to clear the name.

6.Select Save.

USING TIMERS

Event timers allow you to set up the receiver to automatically change to a channel and send a signal to a VCR to record a future “event,” that is, a program. You can set an automatic event timer for a program listed with start and stop times in the Program Guide. A manual event timer allows you to set custom start and stop times for a timer.

EVENT TIMER TYPES

Reminder Reminds you that a program is about to start.

Auto-TuneReminds you that a program is about to start; tunes the receiver to the program when it begins.

VCR Reminds you that a program is about to start; tunes the receiver to the program when it begins; starts a VCR to record the program. See Setting Up the Receiver to Control the VCR on page 35.

Note: Most TV programs and films are copyrighted. In some cases, copyright law may apply to private, in-home recording.

Using Timers

Tip: If you try to make an empty Favorites Lists active, the receiver displays an Error message. You must add at least one channel to this Favorites List before you can make it active.

Tip: You can use an Auto-Tune event timer to remind you that a program is about to start and then automatically tune the receiver to the right channel.

lPage 29