Dish Network Solo 111 manual Event Timer Frequencies

Chapter 3

Using the System

EVENT TIMER FREQUENCIES

Once Applies to a one-time program. If the program time changes, this timer operates at the new time. The receiver deletes this timer when the timer operates.

Mon.-Fri.- Applies to a program that is scheduled for Monday through Friday on the same channel at the same time each day.

Daily - Applies to a program that is scheduled for Monday through Sunday on the same channel at the same time each day.

Weekly - Applies to a program that is scheduled for once a week on the same channel at the same time on the same day.

Note: You can record only the program to which the receiver is tuned. If you open any menu (including the Program Guide) while recording a program on videotape, the menu also will be recorded. If a program time changes by more than 24 hours, the timer will not operate.

BEFORE AN EVENT TIMER OPERATES

Five minutes before an event timer operates, the receiver displays a small blinking “clock” symbol on the TV screen. This symbol disappears when the program begins. While the symbol is displayed, you may do either one of the following.

•Press the remote control CANCEL button to clear the symbol from the TV screen. This does not affect the timer; it will operate.

•Press the remote control INFO button to see more information on the event timer. If you do this, you will have the following choices:

•Select the OK or Cancel option to continue with the event timer.

Or

Select the Stop Timer or No option to stop the event timer.

Or

Note: This stops only this instance of a Mon.-Fri., Daily or Weekly timer. The timer will operate the next time it is scheduled. To stop all operations of such a timer, you must delete the timer. For a Reminder Event Timer, instead of having the option to stop the timer, you have the option to tune to the program.

Page 30