Dish Network Solo 111 manual Using Locks

WHEN YOU HAVE LOCKED THE RECEIVER

If you try to access a locked item or open the Parental and System Locks menu, the receiver displays a message prompting you to enter the password.

The receiver allows you three tries to enter the correct password. If you fail to enter the correct password, the receiver does not allow more tries for several minutes.

If you enter the correct password, you can access the locked item or open the Parental and System Locks menu.

If you exit a locked item or close the Parental and System Locks menu, you must enter the password again to access the item or open the menu again.

If you forget your password, you will need to speak with a Customer Service Representative and may need to provide some information related to your account including a Personal Identification Number (PIN), if used. See page 44 for information on PINs.

CREATING A PASSWORD

You must lock the receiver for any receiver Parental Locks you set to take effect. To lock the receiver, you must first create a password. If you forget your password, you will need to call the Customer Service Center at 1-800- 333-DISH (3474).

To create a password:

1.Press the MENU button to display the Main menu.

2.Select the Locks option to display the Parental and System Locks menu.

Note: If the receiver displays a message prompting you to enter a password, the receiver has already been locked.

3.Select the Lock System option. The receiver displays a message prompting you to enter a password.

Note: If this option appears as Unlock System instead, the receiver is already locked.

4.Enter and verify a password, using the number pad buttons. The receiver displays stars (*) as you enter the digits of the password.

5.Memorize your password. From now on, you must enter this password to lock or unlock the receiver.

6.Highlight and select the OK option. Re-enter the password. All the locks you have set are now in effect.

Using Locks

lPage 37