Kathrein MSK 25 Frequency Display and Frequency Entry, SAT Menu Frequency Entry, LEV 86.5dBuV

SAT measurement

Frequency Display and Frequency Entry

To measure the level of a received signal, you must first enter the frequency required. The LC display indicates the frequency and the level ☞ measured. Frequency entry is possible from 920 MHz to 2150 MHz in

100 kHz steps.

SAT Menu Frequency Entry

À

FR:1288.0MHz	SAT
LEV: 66.5dBuV	A │

[SAT/TV] Changing over to SAT reception

[0]to [9] Entering frequency

[+][-]Varying frequency in 100 kHz steps [ENTER] Confirming your entry

LC display:

•Frequency: 1288 MHz

•Mode: SAT

Example

✐

FR:1508.0MHz	SAT
LEV: 86.5dBuV	A │

•Level: 66.5 dBµV A (A = analogue)

Enter the frequency 1508 MHz by pressing [1] [5] [0] [8] [ENTER]

LC display:

•frequency: 1508 MHz

•mode: SAT

•level: 86.5 dBµV (A = analogue)

Note

☞

The indicaton „+“ or „–“ on the display means that the MSK 25 has not been exactly tuned to the carrier required. Bei pressing either [+] or [-],the frequency can be finetuned for optimum reception. This has been achieved when a vertical line appears on the display.

Press [ENTER] to complete the frequency entry.

The last frequency entry will be retained even after you have switched off the MSK25, provided that the entry was carried out via numeric character input ending with ‚MHz‘

18