Kathrein MSK 25 Bearing for Individual Reception Frequencies, Bearing Menu LEV-Range2 SAT Example

SAT measurement

Bearing for Individual Reception Frequencies

Bearing Menu

À

LEV-Range:2 SAT

>■■■■

Example

✐

Exit:

The „LEVEL ♫“ function allows the antenna alignment to maximum received signal via bearing. The level tendency can be bargraph- displayed.The measurement range can be adjusted to three different sensitivity levels.

The level can be monitored with an acoustic signal, the pitch of which is proportional to the received-signal level. The volume of the directional radio audio signal can be adjusted with the volume regulator.

[2ndF] [LEVEL ♫] Changing over to bearing mode:

[-] [+] Change-over of the measurement range of the bar graph. The measurement range is automatically preselected.

Level range 1: high input levels

Level range 2: medium input levels

Level range 3: low input levels

[2ndF] [2ndF] Exit

LC display:

•Level range 2: medium input level

•Mode: SAT

•Bargraph display

Calling up „LEVEL ♫“ mode

Press [2ndF] [LEVEL♫].

Move the antenna until the maximum amplitude of the bargraph display is reached.

If necessary, diminish or elevate the sensitivity by pressing either [-]or

[+].

Repeat this procedure until the maximum level is reached.

Press [2ndF] twice.

21