SAT measurement
DVB-S MER, BER and Offset Measurement
The modulation error rate (MER), the bit error rate (BER) and the carrier offset can be measured to rate the digital reception quality. Chapter ‚standard
Calling up DVB-S measurement:
Press [2ndF] [DVB] in SAT reception mode
LC display:
|
|
MER:12.6dB | MHz |
| + 0.72 |
|
|
|
|
•(MER) modulation error rate: 12.6 dB
•(BER) bit error rate:
•Carrier offset +0.72 MHz
In case there are no bit errors identified due to a strong DVB signal,
BER=0.0e+0 is indicated on the display.
MPEG Picture Representation (option) in DVB-S
After selecting DVB measurement by pressing [2ndF] [DVB], the list of programmes received via digital transport data stream is displayed on the TFT screen.
Press [+] or
In case of an FTA programme, picture and sound of the desired programme are decoded and represented or reproduced respectively via the loudspeaker which is built in.
Select another programme on the list by pressing [Enter] once more.
Press [2ndF] to exit digital reception.
Note
For measuremts exceeding 100 dBµV please use the enclosed ☞ attenuation plug, as otherwise no video representation and no MER and
BER measurements are possible.
(Find indications on the frequency response of the enclosed attenuation plug on the last page)
23