Kathrein MSK 25 manual Framing Byte Menu, Press 2ndF SAT-CTRL, Hex

Page 27

SAT measurement

✐

DiSEqC-

SAT-CTRL menu

DiSEqC-Framing

E■

DiSEqC™ menu

DiSEqC-COMMAND E0 00 24 >

DiSEqC™ menu

Note

Example for a USER entry

You wish to check the EXR 22 KATHREIN matrix. The instruction set for the EXR 22 matrix is E0 00 24 (LNB High) and E0 00 20 (LNB Low).

Calling up DiSEqC™:

Press [2ndF] [SAT-CTRL]

Press [0] to call up USER entry.

You can now enter the indvidual code words by pressing [0] to [9] and [./S]. Press [ENTER] to send the command. „>“ signalises the successful sending of the command.

The instruction set to trigger the EXR 22 KATHREIN matrix has been entered and sent.

☞	Please find the DiSEqC™ instruction sets for KATHREIN matrices, Types
	EXR 20 and EXR 22 and for the 9xx production run in the technical
	appendix.
Framing Byte Menu

	HEX		description
	Byte
À	E0		Command from master, nonrecurring transmission
	E1		Command from master, recurrent transmission
	E2		Command from master, response anticipated, first transmission
	E3		Command from master, response anticipated, recurrent
			transmission
	E4		Response from slave, „OK“, no errors recognised
	E5		Response from slave, command not supported by slave
	E6		Response from slave, parity error recognised
	E7		Response from slave, command not identified

27

Image 27

Contents MSK 25 Satellite/TV/FM Test Receiver analogue/digital Preface Contents Mpeg Picture Representation option in DVB-C or DVB-T option Additionally included in Delivery Signs and SymbolsSafety Rules General InformationPage Cofdm Overview of FunctionsQpsk QAMLNB 0/5 20 SAT Technical DataDVB-S-MER1 TFT Colour Screen Control Elements and IndicatorsControl Elements Connections right hand sideSAT/DVB-S TV/DVB-C/*DVB-T Short Cut OverviewScart Output ConnectionsRF Input Socket External DC Voltage SupplySoftware Accu −−−−− LEV 48.5dBuV Switching-UpSwitching-Off CommissioningSetup Menu Call-Up Setup-MenuFactory Setting on Delivery Setup Menu SettingMains Operation and Battery Operation Battery OperationMains Operation Press 2ndF STD SAT measurementStandard Change-Over 2ndF STDLEV 86.5dBuV Frequency Display and Frequency EntrySAT Menu Frequency Entry Example FR1508.0MHzSAT Analogue Level Measurement SAT DVB-S Level MeasurementLevel Overflow and Level Underflow 2ndF 2ndF Exit Calling up Scan mode Press 2ndF ScanLocating Satellites Scan Menu LEV-Range2 SAT ExampleBearing for Individual Reception Frequencies Bearing Menu LEV-Range2 SAT ExamplePress 2ndF Level SAT Analogue Sound Carrier Frequency Press 2ndF SCBwnarrow MER12.6dB MHz BER1.7e-7 DVB-S MER, BER and Offset MeasurementMpeg Picture Representation option in DVB-S Calling up DVB-S measurementPress 2ndF LNB LNB Voltage and 22 kHz/60 Hz Change-OverPress 2nF LNB Example LNB14,0V 22kHz 150mAOr + DiSEqC Digital Satellite Equipment ControlFraming Byte Menu Press 2ndF SAT-CTRLHEX Hex Byte Description Address Byte MenuCommand Byte Menu SAT measurement 2ndF 2ndF Simple Tone Burst DiSEqCData Byte Menu 2ndF SAT-CTRLTV measurement Bis=ANALOG 3=DVBT DVB-C/DVB-T Change-Over Press ./S 1 TV Channel Setting Menu Example CHS.11 LEV 62,5dBuVChannel display and channel entry Changing over to special channelThen press 1 7 5 ./S 2 5 Enter TV Frequency Entry Mode Example CH175,25 LEV 65,0dBuVLEV.dBuV Level Measurement TV AnalogueTV/DVB-C/DVB-T Level Measurement LEV.dBuVLEV-RANGE2 TV Bearing MenuSound Carrier Distance and Sound Carrier Level TT1 TT22ndF SC Example SC 5.85 MHz BER=2.145E-05 Nicam Sound Bit Error Rate MeasurementCalling up DVB-C/DVB-T option measurement DVB-C/DVB-T option, MER, BER and Offset MeasurementMpeg Picture Representation option in DVB-C or DVB-T option MER30.5dB MHz BER2.0e-8Then press 9 9 ./S 2 5 Enter FM measurementFrequency Indication and Frequency Entry FM Frequency Entry Menu Example LEV 65.0dBuVLevel Measurement Fr104.80MHz LEV 86.5dBuVFR104.80MHz LEV .dBuV FR104,80MHz LEV¯¯¯.¯dBuV LEV-RANGE2 FM SAT-Full Spectrum MeasurementSAT Spectrum TV SpectrumTV-Narrow FM SpectrumTV Spectrum Menu TV-Full VHF UHFMaintenance Changing the BatteryCustomer Service Signal-to-Noise-Ratio Technical Appendix+14.1 dB Instruction Set for EXR 22 Kathrein Matrix DiSEqC Commands for Kathrein MatricesInstruction Set for 9xx Kathrein Matrix Production Run Instruction Set for EXR 20 Kathrein MatrixVRF-CCIR URF-CCIR Channel TablesVHF UHF III Technical Appendix Technical Appendix Technical Appendix Technical Appendix 936.2642/D/1005/ZWT Subject to technical modifications