Kathrein UFS 902 First Installation Single-cable system manual

FIRST INSTALLATION: Single-cable system (manual)

Selection “EXR 552”

When the EXR 552 single-cable switching matrix is being used, it is essential that the LNB is set to “Universal”!

Transmission channel

Use the  buttons to select a free available transmission channel. A maximum of two transmission channels are available (1400 and 1516 MHz).

Test connection

When you have set a free transmission channel, press the  buttons to switch to the “Test

connection” selection field and press the  button. The receiver now tests whether a connection to the single-cable system can be established or not. As soon as the receiver has established a connection to the single-cable system, you will see the following display:

Press the  button to acknowledge this display. Then press the  button. You will be asked whether you wish to save the changes. Use the buttons to select “Yes, save changes” and confirm by pressing the  button. Now press the ! (green) button.

The receiver will automatically display the menu for the

channel search. Continue with the section (Execute channel search).

If no connection to the single-cable system could be established, the following display appears:

Check your settings and if necessary call for expert help.

25