Kathrein UFS 902 manual Customising Screen Menu, Functions, Auto Dolby Digital Output

SETTINGS

SCART or HDMI/YUV

Auto Dolby Digital OUTPUT

Here you can select whether the receiver should automatically

output the Dolby Digital signal (if this is transmitted).

Audio Delay (setting not currently available!)

Here you can set a delay in milliseconds, if the sound output from your receiver is out of synch with the TV picture (lip synchronicity). The delay can be set in 10 millisecond steps from 10 ms up to 200 ms.

CUSTOMISING SCREEN MENU

FUNCTIONS

Here you can configure the functions on of your receiver. You can choose between “High”, “Normal” and “Low”. The table on the following page shows which functions are available at each configuration step.

	(red) button	"(yellow) button	#(blue) button	button	button
High	Favourites	Options	TV/radio	Channel	Not assigned
	selection	selection		list
Low	Not assigned	Not assigned	Not assigned	Programme	Not assigned
				Guide
Normal	Favourites	Options	TV/radio	Programme	Not assigned
	selection	selection		Guide

65