COMMON INTERFACE
You can find out which Conditional Access module is in the CI slot on the UFS 902 and which Smartcard is in which CA module from the “Mainmenu” under “Settings”, and the “Common Interface” menu.
Confirmation is by pressing the button.
Press the button. You will then see the menu generated by the CA module.
The screenshots below depend on the specific module and card, and so are only intended as examples:
From this menu, your card and your PIN code allow you to access various channels from your pay TV provider.
“CryptoWorks” has been selected as an example here. The details can be different for each CA module. Always follow the instructions supplied by your pay TV provider!
Note: The module displays may be shown in English, even if you have selected German as the menu language, because the menu is generated directly by the module!
Information for Conax, SECA, Viaccess and CryptoWorks users:
Note that with monthly activation intervals, the channel providers have different procedures for activating pay TV cards. Activation may therefore be a few days before or after the beginning of a new month. During this activation period, the CA module and card must be in the slot, and the receiver must be turned on a set to the booked pay TV channel. Follow the instructions from the pay TV provider.
If your pay TV card is then still not enabled, we recommend you briefly withdraw the CA module with the card out of the slot, with the receiver switched on, and then
This information has nothing to do with the properties of the unit; it is merely intended to assist you.
The various items can be selected using the buttons and opened using the button. Press the
button to exit the menu.
48